SKU: 120926
Collections: Handlebars & Hand Controls
LA Choppers Big Twin Peaks Hefty 1 1/4" Handlebars
For years LA Choppers has been a long standing innovator in the motorcycle industry. Today LA Choppers brings you a new twist on the traditional Ape Hanger handlebar - Made in the U.S.A. with a mitered top and a traditional two-bend bottom. These bars measure 1 1/4" in the clamping area.
Product Features
- Made in the U.S.A.
- Drilled for internal wiring
- Notched for throttle-by-wire capability
- 3 1/2" on-center knurling
- 1 1/4" diameter at clamping area
- Mitered top with a traditional two-bend bottom
- Available in Chrome or Gloss Black finishes
- Drilled for internal wiring
- Low-profile touring handlebar
- Great custom look with ample pullback that provides a comfortable wrist angle
- Accepts stock 1" controls
- Will work with stock cables (for most models, measure before installation)
Note: Must use risers that accept handlebars with a 1 1/4" clamping area
Note: Not for use with stock riser and handlebar clamp/gauge mount on XL 883C/1200C models
Note: Accepts H-D OEM heated grips.
Specifications
| Center Width: | 9" |
| Clamping Area Diameter: | 1 1/4" |
| Controls Diameter: | 1" |
| Finish: | Chrome or Gloss Black |
| Handlebar Diameter: | 1 1/4" |
| Overall Width: | 33 1/2" |
| Pullback: | 6" |
| Rise: | 10", 13", 16", 19" |
Handlebar Sizing
To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.
Width: Measure between the two outside points of the handlebars
Rise: Measure from the base of the handlebars to their highest point
Center Width: Measure between the two inside points of the handlebars
Pullback: Measure from the front of the bars to the furthest point back
Fitment Guide
|