Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

LA Choppers Big Twin Peaks Hefty 1-1/4" Handlebars SKU: LA-BGTWN-HFTY

LA Choppers Big Twin Peaks Hefty 1-1/4" Handlebars
Purchase LA Choppers Big Twin Peaks Hefty 1-1/4" Handlebars
  • LA Choppers Big Twin Peaks Hefty 1-1/4" Handlebars SKU: LA-BGTWN-HFTY

  • This item Ships Free
  • Availability:

LA Choppers Big Twin Peaks Hefty 1 1/4" Handlebars

For years LA Choppers has been a long standing innovator in the motorcycle industry. Today LA Choppers brings you a new twist on the traditional Ape Hanger handlebar - Made in the U.S.A. with a mitered top and a traditional two-bend bottom. These bars measure 1 1/4" in the clamping area.

 

Product Features

  • Made in the U.S.A.
  • Drilled for internal wiring
  • Notched for throttle-by-wire capability
  • 3 1/2" on-center knurling
  • 1 1/4" diameter at clamping area
  • Mitered top with a traditional two-bend bottom
  • Available in Chrome or Gloss Black finishes
  • Drilled for internal wiring
  • Low-profile touring handlebar
  • Great custom look with ample pullback that provides a comfortable wrist angle
  • Accepts stock 1" controls
  • Will work with stock cables (for most models, measure before installation)

Note: Must use risers that accept handlebars with a 1 1/4" clamping area

Note: Not for use with stock riser and handlebar clamp/gauge mount on XL 883C/1200C models

Note: Accepts H-D OEM heated grips.

 

Specifications

Center Width:  9"
Clamping Area Diameter:  1 1/4"
Controls Diameter:  1"
Finish:  Chrome or Gloss Black
Handlebar Diameter:  1 1/4"
Overall Width:  33 1/2"
Pullback:  6"
Rise:  10", 13", 16", 19"

 

Handlebar Sizing

To identify your handlebar needs, we recommend measuring your current handlebar's dimensions as a baseline.

 

 

 

Width: Measure between the two outside points of the handlebars

Rise: Measure from the base of the handlebars to their highest point

Center Width: Measure between the two inside points of the handlebars

Pullback: Measure from the front of the bars to the furthest point back

 

Fitment Guide

  • These bars require 1 1/4" diameter riser clamps
  • Not for use on models with stock riser clamp/gauge mount

 

No Reviews Yet!
Rate It