El Diablo Chrome 16" Rise Ape Hangers 1-1/4" Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles

Fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC 1982 to present. May work on throttle-by-wire models with custom fitting

Come with drilled wiring holes.
Product ID: 945
SKU: Dresser 16 Chrome El Diablo 5016-C

Availability: In stock

  • Details

    16" Rise 1-1/4" Handlebars

    To fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present. May work on throttle-by-wire models with custom fitting and any custom application.

    These swedged handlebars have transition from the 1-1/4" diameter to the 1" area for mounting the stock OEM style 1" handlebar controls. These bars are made with CNC bender for a smooth radius at each bend.

    Triple-plated chrome!
    16" rise.

    11" backward sweep.
    1-1/4" diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2" on-center knurling for firm mounting.
    Come with drilled wiring holes.

    Chrome finish

    How to Install New Handlebars:

    Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero.

    The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    1. Fabricated from 1-1/4" inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4. Air nozzle is used to blow the lead string through the bars,Then a length of rope is attached to the string and pulled through the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are 1" inch in diameter at their center mounting position, a stock clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Additional Info
    Additional Info
    Bars By Style El Diablo
    Write Your Own Review

    Only registered users can write reviews. Please, log in or register


    Use spaces to separate tags. Use single quotes (') for phrases.

    You may also be interested in the following product(s)