Chrome Kit El Diablo 18" Ape Hangers with Hand Controls Switches Grips and Mirrors for Harley

CHROME OUT KIT "El Diablo"
CHROME 18" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome Mirrors


This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.


Here is what you are getting:


Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also Available 


This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.


Retail $402.99


----------------------------------------------------------------


"El Diablo" Chrome Apehangers
18" Rise 1-1/4" Handlebars


Triple Plated Chrome!
18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.


Retail $210.99


--------------------------------------------------------------


Chrome Switches and Wire Harness


High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.


Retail $206.99


--------------------------------------------------------------


Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips


Retail $99.99


--------------------------------------------------------------


Chrome Custom Tear Drop Mirrors convex mirrors


Retail $249.99


---------------------------------------------------------------


Total package price:
402.99
210.99
206.99
99.99
249.99


_________________
Total: $1405.95

































 









How to Install New Handlebar



Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.



  1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are


fabricated from 1 1/4-nch tubing and powder coated black.


2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.


3. The new handlebars have oblong holes to run the control wiring in and out through.


4.  air nozzle is used to blow the lead  string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.


5. The rope was used to pull the controls wire harnesses through the bars.


6. The factory risers wer used to mount the new bars.


7. Because the bars are T inch in diameter at  their center mounting position, a stock
clamp was used


8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.


9. The switch wiring exits the front of the switch housing and into the bars.


10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars


11. These stunning bars sure remind us of devil wings.


Product ID: 4399
SKU: 18 Chrome El Diablo Kit 7118-C ,M105,G103,11323CP,C/SWTCH

Availability: Out of stock

$568.88
Details
Details

CHROME OUT KIT "El Diablo"
CHROME 18" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
Chrome Switches, Chrome Grips and Chrome Mirrors

Complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

Here is what you are getting:

Chrome Smooth-Contour Hand Controls
Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
9/16" Bore master cylinder. For Single disc application
(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also Available 

This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.

Retail $402.99

----------------------------------------------------------------

"El Diablo" Chrome Apehangers
18" Rise 1-1/4" Handlebars

Triple Plated Chrome!
18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.

Retail $210.99

--------------------------------------------------------------

Chrome Switches and Wire Harness

High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.

Retail $206.99

--------------------------------------------------------------

Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

Retail $99.99

--------------------------------------------------------------

Chrome Custom Tear Drop Mirrors convex mirrors

Retail $249.99

---------------------------------------------------------------

Total package price:
402.99
210.99
206.99
99.99
249.99

_________________
Total: $1405.95

How to Install New Handlebars:

Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero.

The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

1. Fabricated from 1-1/4" inch tubing and powder coated black.

2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

3. The new handlebars have oblong holes to run the control wiring in and out through.

4. Air nozzle is used to blow the lead string through the bars, Then a length of rope is attached to the string and pulled through the bars.

5. The rope was used to pull the controls wire harnesses through the bars.

6. The factory risers were used to mount the new bars.

7. Because the bars are 1" inch in diameter at their center mounting position, a stock clamp was used

8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

9. The switch wiring exits the front of the switch housing and into the bars.

10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

11. These stunning bars sure remind us of devil wings.

Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Use spaces to separate tags. Use single quotes (') for phrases.