5 W lamps are a direct replacement for most American made buckets. However Harley made several buckets that were very shallow. For those of you with shallow buckets we have included with each lamp a wire pig tail consisting of 3 wires. First bend the blade connectors on the back of the bulb so they are flat to the back of the bulb 90 degrees. Then plug in the 3 wires, you can either cut the stock wires off of your bulb socket and solder them onto the pig tail or plug them into your existing bulb socket and tape the socket to the back of your new lamp. By doing this your new lamp should fit into the shallow bucket.
One year from date of purchase. The warranty is void if you use higher wattage or Blue tint bulbs. You should not use any higher wattage bulbs because you risk melting the bulb socket and/or melting the insulation on your wiring. Using either higher wattage or blue tint bulbs creates more heat and heat will also cause the lamps to fog and will cook any contamination that enters the lamp. The contamination will turn black and stick to the reflector.
55/60W H4 Halogen sealed beam. High/Low beam.
Fits any 5-3/4" headlight assemblies on any Harley-Davidson models
and any custom application even springers
can also be used on Honda, Yamaha, Kawasaki, Suzuki, Victory.
Made in the USA