Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

Handlebars and Hand Controls

Here you can find 1-1/4" phat handlebars for Harley or custom chopper. Demon's Cycle offer drag and t-bars in various rise. Our handlebars have accommodations for internal wiring. We also offer apehangers and handlebars for Harley springers.

To make your custom project easier please check out handlebars with hand controls.All the installation is done professionally saving you the aggravation of doing internal wiring yourself. Demon's Cycle proud to present T-bars with built-in L.E.D. turn signals of our own design.

These custom 1-1/4" handlebars for Harley-Davidson are available in various rises and in fully wired versions with hand controls installed. Here you will also find custom chrome biller risers for Harley.

How to Install New Handlebar

 

ALL HANDEBARS AVAILABLE IN HYDRAULIC CLUTCH OPTION. CALL FOR PRICING

 

 

Items 1 to 48 of 379 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8

Grid  List 

Set Descending Direction
  1. Black 1-1/4" Drag Pullback Handlebars 10" Rise T-Bars Harley-Davidson

    Black 1-1/4" Drag Pullback Handlebars 10" Rise T-Bars Harley-Davidson

    $84.99


    BLACK 10" Rise 1-1/4" T-Bars

    To fit All Harley-Davidson motorcycles and Custom Application

    Powdercoated BLACK!
    10" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
     
     

    Learn More
  2. El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90

    El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90

    $139.00

    "EL DIABLO" CHROME  APEHANGERS
    17" Rise 1-1/4" Handlebars


    2005-2009 Suzuki VL1500 Boulevard C90
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    SHOW CHROME!

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  3. El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2004-2010 Kawasaki VN2000A Vulcan

    El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2004-2010 Kawasaki VN2000A Vulcan

    $139.00

    "EL DIABLO" CHROME  APEHANGERS
    17" Rise 1-1/4" Handlebars


    2004 - 2010 Kawasaki VN2000A Vulcan
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    SHOW CHROME

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  4. El Diablo Chrome17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2006-2015 Kawasaki VN900B Vulcan Classic

    El Diablo Chrome17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2006-2015 Kawasaki VN900B Vulcan Classic

    $139.00

    "EL DIABLO" CHROME  APEHANGERS
    17" Rise 1-1/4" Handlebars


    Fits 2006 - 2015 Kawasaki VN900B Vulcan Classic
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    SHOW QUALITY CHROME!

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  5. El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2007-2009 Honda VT750C2 Shadow Spirit

    El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2007-2009 Honda VT750C2 Shadow Spirit

    $139.00

    "EL DIABLO" CHROME  APEHANGERS
    17" Rise 1-1/4" Handlebars


    Fits 2007 - 2009 Honda VT750C2 Shadow Spirit
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    Chrome

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  6. El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for 2000 - 2007 Honda VT1100C2 Shadow Sabre

    El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for 2000 - 2007 Honda VT1100C2 Shadow Sabre

    $139.00

    "EL DIABLO" Chrome  APEHANGERS
    17" Rise 1-1/4" Handlebars


    Fits 2000 - 2007 Honda VT1100C2 Shadow Sabre
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    Chrome

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  7. 4" Black Z-Bars 1-1/4" Drag Style Handlebars for Harley-Davidson Softail

    4" Black Z-Bars 1-1/4" Drag Style Handlebars for Harley-Davidson Softail

    $89.99


    Custom 1-1/4" 'Z-Bars'
    Black Handlebars

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hot, new custom 'looks' and have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to most Harley-Davidson models
    (except Springer Softail models)
    from 1974 to present and Custom Application.

    34"-wide
    4"-rise
    3"-pullback

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  8. 4" Black Z-Bars 1-1/4" Drag Style Handlebars Harley-Davidson Sportster and Dyna

    4" Black Z-Bars 1-1/4" Drag Style Handlebars Harley-Davidson Sportster and Dyna

    $89.99


    Custom 1-1/4" 'Z-Bars'
    Black Handlebars

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hot, new custom 'looks' and have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to most Harley-Davidson Sportster and Dyna models
    (except Springer Softail models)
    from 1974 to present and Custom Application.

    34"-wide
    4"-rise
    3"-pullback

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  9. Black 4" Z-Bars 1-1/4" Drag Style Handlebars with Risers for Harley-Davidson Sportster and Dyna

    Black 4" Z-Bars 1-1/4" Drag Style Handlebars with Risers for Harley-Davidson Sportster and Dyna

    $169.99


    Custom 1-1/4" 'Z-Bars'
    Black Handlebars and Spike Risers

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hot, new custom 'looks' and have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to most Harley-Davidson Sportster and Dyna models
    (except Springer Softail models)
    from 1974 to present and Custom Application.

    34"-wide
    4"-rise
    3"-pullback

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  10. Black 8" Z-Bars 1-1/4" Drag Style Handlebars with Risers for Harley-Davidson Sportster and Dyna

    Black 8" Z-Bars 1-1/4" Drag Style Handlebars with Risers for Harley-Davidson Sportster and Dyna

    $169.99


    Custom 8" 'Z-Bars'
    Black Handlebars and Spike Risers

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hot, new custom 'looks' and have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to most Harley-Davidson Sportster and Dyna models
    (except Springer Softail models)
    from 1974 to present and Custom Application.

    34"-wide
    8"-rise
    3"-pullback

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  11. 8" Black Z-Bars 1-1/4" Drag Style Handlebars for Harley-Davidson Softail Sportster Dyna

    8" Black Z-Bars 1-1/4" Drag Style Handlebars for Harley-Davidson Softail Sportster Dyna

    $99.99


    Custom 8" 'Z-Bars'
    Black Handlebars

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hot, new custom 'looks' and have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to most Harley-Davidson models
    (except Springer Softail models)
    from 1974 to present and Custom Application.

    34"-wide
    8"-rise
    3"-pullback

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  12. 8" Black Z-Bars 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson

    8" Black Z-Bars 1-1/4" Diameter with Black Hand Controls and Switches for Harley-Davidson

    $499.99

    "Z- Bars" Black 8" Rise Ape Hangers
    with Smooth-Contour Control Kit
    and Black Switches

    This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    "Z-Bars" Black 
    Apehangers
    8" Rise 1-1/4" Handlebars


    Powdercoated flat black!
    8" rise. 3" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    34" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Black Switches and Wire Harness

    High quality USA made Black switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97

     

     
     

     


     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  13. 8" Black Z-Bars1-1/4" Diameter with Black  Switches for Harley-Davidson

    8" Black Z-Bars1-1/4" Diameter with Black Switches for Harley-Davidson

    $225.00

    "Z- Bars" Black 8" Rise Ape Hangers
    with Smooth-Contour Control Kit
    and Black Switches

    This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and Black switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:


    "Z-Bars" Black 
    Apehangers
    8" Rise 1-1/4" Handlebars


    Powdercoated flat black!
    8" rise. 3" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    34" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Black Switches and Wire Harness

    High quality USA made Black switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

     


     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  14. 14" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    14" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    $274.99

    Chrome 14" Rise Ape Hangers
    Internaly Wired with Chrome Switches

    This listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
    We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.

    Here is what you are getting:


    Chrome 
    Apehangers
    14" Rise 1-1/4" Handlebars


    Show Chrome!
    14" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price:
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $652.98

     

     

     

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  15. Black 1-1/4" Drag Pullback Handlebars 8" Rise T-Bars fit Harley-Davidson

    Black 1-1/4" Drag Pullback Handlebars 8" Rise T-Bars fit Harley-Davidson

    $84.99


    BLACK 8" Rise 1-1/4" T-Bars

    To fit All Harley-Davidson motorcycles and Custom Application

    Powdercoated BLACK!
    8" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.
    Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
     
     

    Learn More
  16. Black 1-1/4" Handlebars Pullback T-Bars 8" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars Pullback T-Bars 8" Rise with Hand Controls + Switches for Harley-Davidson

    $399.99

    BLACK 8" Rise T-Bars
    with Chrome Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK 8" Rise  1-1/4" T-Bars

    Powder coated black!
    8" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    210.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1055.97--

     

    Learn More
  17. Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models

    Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models

    $89.99

    Cafe Racer Style Custom
     1-1/4" 'Z-Bars'
    Black Handlebars

    These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
    the hottest and newest custom bars out. Get them now to customize your bike to that one of a kind look. They have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to Cafe Racer style Metric Bikes and Sportster Models
    from 1974 to present and Custom Application.

    34"-wide
    4"-rise
    3"-pullback
    3 1/2" From Center to Center For Risers.

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4"- inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  18. El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50

    El Diablo Chrome 17" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50

    $139.00

    "EL DIABLO" CHROME APEHANGERS
    17" Rise 1-1/4" Handlebars


    2005 - 2015 Suzuki VL800 Boulevard C50
    • El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
    • Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
    • You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
    • The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
    • Bar rise is 17", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders 
    • Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
    • Requires longer control cables, but most stock 1" type controls
    • Fits bikes with riser spacing of 3-1/2" to 4"
    • Works with most stock and aftermarket risers
    • Diameter: 1-1/4"
    • Width: 37"
    • Rise: 17"
     
    SHOW QUALITY CHROME

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  19. Custom Black 1-1/4" Fat Drag Handlebars 6" Rise T-Bars Harley-Davidson

    Custom Black 1-1/4" Fat Drag Handlebars 6" Rise T-Bars Harley-Davidson

    $84.99


    BLACK 6" Rise 1-1/4" T-Bars

    To fit All Harley-Davidson motorcycles and Custom Application

    Powdercoated BLACK!
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. 1/2" Course Thread Riser Holes. Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
     
     

    Learn More
  20. Chrome Pullback 1-1/4" Fat Custom Drag Handlebars 6" Rise T-bars Harley-Davidson

    Chrome Pullback 1-1/4" Fat Custom Drag Handlebars 6" Rise T-bars Harley-Davidson

    $84.99


    Chrome 6" Rise 1-1/4" T-Bars

    To fit All Harley-Davidson motorcycles and Custom Application

    Tripleplated chrome!
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. 1/2" Course Thread Riser Holes. Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
     
     

    Learn More
  21. Chrome 1-1/4" Fat Custom Drag Handlebars 10" Rise Pullback T-bars Harley-Davidson

    Chrome 1-1/4" Fat Custom Drag Handlebars 10" Rise Pullback T-bars Harley-Davidson

    $84.99


    Chrome 10" Rise 1-1/4" T-Bars

    To fit All Harley-Davidson motorcycles and Custom Application

    Tripleplated chrome!
    10" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. 1/2" Course Thread Riser Holes. Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
     
     

    Learn More
  22. Black 1-1/4" Handlebars Pullback T-Bars 10" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars Pullback T-Bars 10" Rise with Hand Controls + Switches for Harley-Davidson

    $399.99

    BLACK 10" Rise T-Bars
    with Chrome Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK 10" Rise  1-1/4" T-Bars

    Powder coated black!
    10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    210.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1055.97--

     

    Learn More
  23. Black 1-1/4" Handlebars Pullback T-Bars 6" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars Pullback T-Bars 6" Rise with Hand Controls + Switches for Harley-Davidson

    $399.99

    BLACK 6" Rise T-Bars
    with Chrome Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK 6" Rise  1-1/4" T-Bars

    Powder coated black!
    6" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    210.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1055.97--

     

    Learn More
  24. 13" Rise BLACKOUT Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers W/ Cruise Control 1996-2012 Motorcycles

    13" Rise BLACKOUT Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers W/ Cruise Control 1996-2012 Motorcycles

    $575.55

    Black 14" Rise 'El Diablo' Ape Hangers
    with Black Hand Control Kit
    and Black Switches

    For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012

    May work on throttle-by-wire models with custom fitting and any custom application

    (Only for models with CRUISE and RADIO ONLY)

    This listing is for complete 1-1/4" fat handlebar set-up. All components are Powder coated Black top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    11/16" Bore master cylinder. For dual disc application.
    with radio controls and  cruise control

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.


    Retail $402.99

    ----------------------------------------------------------------


    Black 'El Diablo'
    Swedged Apehangers
    14" Rise 1-1/4" Handlebars
    for Bagggers/Dressers

    Show Black!
    14" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Black Switches and Wire Harness

    High quality Black switches for Dresser hand controls with radio control and cruise control.
    Wires are soldered and color-coded for easy installation.

    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  25. SPORTSTER - DYNA BLACK TBARS FAT 1-1/4" 10" HANDLEBARS HARLEY DAVIDSON Motorcycles

    SPORTSTER - DYNA BLACK TBARS FAT 1-1/4" 10" HANDLEBARS HARLEY DAVIDSON Motorcycles

    $84.99


    BLACK 10" Rise 1-1/4" T-Bars

    To fit Harley-Davidson FLST, FXST, Sportster XL DYNA , LOWRIDER , 48 SPORTSTER , including Throttle-by-wire models, and any custom application.

    Powdercoated BLACK!
    10" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
     
     

    Learn More
  26. SPORTSTER - DYNA BLACK TBARS FAT 1-1/4" 6" HANDLEBARS HARLEY DAVIDSON Motorcycles

    SPORTSTER - DYNA BLACK TBARS FAT 1-1/4" 6" HANDLEBARS HARLEY DAVIDSON Motorcycles

    $84.99


    BLACK 6" Rise 1-1/4" T-Bars

    To fit Harley-Davidson FLST, FXST, Sportster XL DYNA , LOWRIDER , 48 SPORTSTER , including Throttle-by-wire models, and any custom application.

    Powdercoated BLACK!
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
     
     

    Learn More
  27. Sportster - DYNA Chrome TBARS FAT 1-1/4" 6" HANDLEBARS HARLEY DAVIDSON Motorcycles

    Sportster - DYNA Chrome TBARS FAT 1-1/4" 6" HANDLEBARS HARLEY DAVIDSON Motorcycles

    $84.99


    Chrome 6" Rise 1-1/4" T-Bars

    To fit Harley-Davidson FLST, FXST, Sportster XL DYNA , LOWRIDER , 48 SPORTSTER , including Throttle-by-wire models, and any custom application.

    Tripleplated chrome!
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. 1/2" Course Thread Riser Holes.Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
     
     

    Learn More
  28. 1-1/4" Handlebars Pullback "T-Bars" 6" Rise with Hand Controls and Switches Custom Harley

    1-1/4" Handlebars Pullback "T-Bars" 6" Rise with Hand Controls and Switches Custom Harley

    $399.99

    Chrome 6" Rise T-Bars
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THEN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality then HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    CHROME 6" Rise  1-1/4" T-Bars

    Show chromed!
    6" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
    31" wide

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    210.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1055.97--

     

     

    Learn More
  29. 1-1/4" Handlebars Pullback "T-Bars" 10" Rise with Hand Controls and Switches Custom Harley

    1-1/4" Handlebars Pullback "T-Bars" 10" Rise with Hand Controls and Switches Custom Harley

    $399.99

    Chrome 10" Rise T-Bars
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THEN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality then HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    CHROME 10" Rise  1-1/4" T-Bars

    Show chromed!
    10" rise. 3 1/2" Pullback. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
    31" wide

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    210.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1055.97--

     

     

    Learn More
  30. 12" Rise BLACKOUT Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers W/ Cruise Control 1996-2012 Motorcycles

    12" Rise BLACKOUT Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers W/ Cruise Control 1996-2012 Motorcycles

    $575.55

    Black 12" Rise 'El Diablo' Ape Hangers
    with Black Hand Control Kit
    and Black Switches

    For Harley-Davidson Touring (Dresser / Bagger) models W/ Cruise Control from 1996 to 2012

    May work on throttle-by-wire models with custom fitting and any custom application

    (Only for models with CRUISE and RADIO ONLY)

    This listing is for complete 1-1/4" fat handlebar set-up. All components are Powder coated Black top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    11/16" Bore master cylinder. For dual disc application.
    with radio controls and  cruise control

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.


    Retail $402.99

    ----------------------------------------------------------------


    Black 'El Diablo'
    Swedged Apehangers
    12" Rise 1-1/4" Handlebars
    for Bagggers/Dressers

    Show Black!
    12" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    Come with drilled wiring holes.

    Retail $210.99

    --------------------------------------------------------------

    Black Switches and Wire Harness

    High quality Black switches for Dresser hand controls with radio control and cruise control.
    Wires are soldered and color-coded for easy installation.

    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  31. El Diablo Chrome 11" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for Harley Motorcycles

    El Diablo Chrome 11" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for Harley Motorcycles

    $129.00

    "EL DIABLO" CHROME UNIVERSAL APEHANGERS
    11" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST and any custom application.
     
    Triple plated chrome!
    11" rise. 8" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.

    Chrome finish

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  32. Chrome 11" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    Chrome 11" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    $99.99

    "CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
    11" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Triple plated chrome!
    11" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Chrome finish

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  33. Chrome 13" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    Chrome 13" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    $109.99

    "CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
    13" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Triple plated chrome!
    13" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Chrome finish

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  34. Chrome 15" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    Chrome 15" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    $109.99

    "CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
    15" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Triple plated chrome!
    15" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Chrome finish

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  35. El Diablo Black 13" Rise Ape Hangers 1-1/4" Diameter Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles

    El Diablo Black 15" Rise Ape Hangers 1-1/4" Diameter Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles

    $129.00

    "EL DIABLO" BLACK APEHANGERS
    15" Rise 1-1/4" Handlebars


    To fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present including.
    May work on throttle-by-wire models with custom fitting and any custom application.
     
    These swedged handlebars have transition from the 1-1/4" diameter to the 1" area for mounting the stock OEM style 1" handlebar controls. These bars are made with CNC bender for a smooth radius at each bend.
     
    Powdercoated black!
    15" rise. 11" backward sweep.
    1-1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    Come with drilled wiring holes.
     
    Black finish

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  36. Master Cylinder and Brake Lever Black Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars

    Master Cylinder and Brake Lever Black Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars

    $139.00

    Black Smooth-Contour Master Cylinder with Brake Lever Assembly

    Will fit all dual disc 1996-2010 Harley-Davidson models.
    Will also fit 1984 thru 1995 Dual disc models.

    Will fit 2007-Up models with safety switch.
    11/16" Bore master cylinder.

    This is top quality master cylinder.

     

     

    Learn More
  37. Master Cylinder and Brake Lever Chrome Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars

    Master Cylinder and Brake Lever Chrome Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars

    $139.00

    Chrome Smooth-Contour Master Cylinder with Brake Lever Assembly

    Will fit all dual disc 1996-2010 Harley-Davidson models.
    Will also fit 1984 thru 1995 Dual disc models.

    Will fit 2007-Up models with safety switch.
    11/16" Bore master cylinder.

    This is top quality master cylinder.

     

     

    Learn More
  38. 12" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    12" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    $274.99

    Chrome 12" Rise Ape Hangers
    Internaly Wired with Chrome Switches

    This listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
    We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.

    Here is what you are getting:


    Chrome 
    Apehangers
    12" Rise 1-1/4" Handlebars


    Show Chrome!
    12" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price:
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $652.98

     

     

     

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  39. 18" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    18" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    $274.99

    Chrome 18" Rise Ape Hangers
    Internaly Wired with Chrome Switches

    This listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
    We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.

    Here is what you are getting:


    Chrome 
    Apehangers
    18" Rise 1-1/4" Handlebars


    Show Chrome!
    18" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price:
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $652.98

     

     

     

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  40. 16" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    16" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    $274.99

    Chrome 16" Rise Ape Hangers
    Internaly Wired with Chrome Switches

    This listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
    We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.

    Here is what you are getting:


    Chrome 
    Apehangers
    16" Rise 1-1/4" Handlebars


    Show Chrome!
    16" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price:
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $652.98

     

     

     

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  41. 9" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    9" Chrome El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson

    $274.99

    Chrome 9" Rise Ape Hangers
    Internaly Wired with Chrome Switches

    This listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
    We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.

    Here is what you are getting:


    Chrome 
    Apehangers
    9" Rise 1-1/4" Handlebars


    Show Chrome!
    9" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price:
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $652.98

     

     

     

     

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  42. Black Hand Controls for 1996-2010 Single Disc Harley-Davidson Handlebars

    Black Hand Controls for 1996-2010 Dual Disc Harley-Davidson Handlebars

    $224.99

    Black Smooth-Contour Hand Control Kit

    Switch housings use Stock HD or CC custom rounded switches.

    BETTER LOOK AND FINISH THAN ANY HD PRODUCT.

    Will fit all dual disc 1996-2010 Harley-Davidson models.
    Will also fit 1984 thru 1995 dual disc models with simple rewiring.
    It is possible to update most models from 1972 thru 1995 to the latest style with minor wiring and control cable changes.
    Will fit 2007-Up models with safety switch. 11/16" Bore master cylinder.

    This is top quality kit.

    Complete Kit Includes: Ergonomic clutch and brake levers, master cylinder, switch housings, brackets and hardware.

    Learn More
  43. Black Hand Controls and Switches for Harley-Davidson FLT 1996-2008

    Black Hand Controls and Switches for Harley-Davidson FLT 1996-2008

    $269.99

    Black Hand Control Kit

    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND BLACK FINISH THEN ANY HD PRODUCT.

    Will fit all 1996--2008 Harley-Davidson FLT models.

    Switch housings with Cruise Control and Radio Control.
     
    11/16" Bore master cylinder.

    This is top quality kit.

    Complete Kit Includes: Ergonomic clutch and brake levers, master cylinder, switch housings,switches,wires,
    brackets,wire diagram and hardware.


    Learn More
  44. Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    $119.99

    BLACK 6" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles FLST, FXST, Sportster XL DYNA , LOWRIDER , including Throttle-by-wire models, and any custom application.

    Powdercoated BLACK!
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 31" end to end. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
    Learn More
  45. Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

    $119.99

    BLACK 8" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles FLST, FXST, Sportster XL DYNA , LOWRIDER , including Throttle-by-wire models, and any custom application.

    Powdercoated BLACK!
    8" rise. 3 1/2" Pullback. 6.5" backward sweep. 31" end to end. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.

    Learn More
  46. Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    $119.99

    BLACK 10" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles FLST, FXST, Sportster XL DYNA , LOWRIDER , including Throttle-by-wire models, and any custom application.

    Powdercoated BLACK!
    10" rise. 3-1/2" Pullback. 6.5" backward sweep. 31" end to end. 1-1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
     

    Learn More
  47. Chrome 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    Chrome 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    $119.99

    CHROME 6" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles FLST, FXST, Sportster XL DYNA , LOWRIDER , including Throttle-by-wire models, and any custom application.
     
    CHROME PLATED!
     
    6" rise. 3 1/2" Pullback. 6.5" backward sweep. 31" end to end. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit.Come with oversized drilled wiring holes to accommodate any internal wiring. 1/2" Course Thread Riser Holes. Pre-strung for easy internal wire installation.
    Learn More
  48. Chrome 9" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    Chrome 9" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    $99.99

    "CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
    9" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Triple plated chrome!
    9" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Chrome finish

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More

Items 1 to 48 of 379 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8

Grid  List 

Set Descending Direction