Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

  • Demon's Cycle Logo Ladies T-Shirt "High Maintenance" White Large

    Demon's Cycle Logo Ladies T-Shirt "High Maintenance" White Large

    $14.99


    DEMON'S CYCLE LADIE'S T-SHIRT

    This is a Brand New 100% Cotton shirt with "High Maintenance" cute biker girl skull and bones graphics and Demon's Cycle logo print on the chest.

    This shirt is a great gift idea.

    Tee shirt is brand new.
    Color - White.
    Style - Short sleeve
     
    Size Large

    Learn More
  • Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XL

    Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XL

    $9.99

    Demon's Cycle Logo T-Shirt

    Printed Demon's Cycle Inc. logo t-shirt
    Front and back prints in Red, Black and Silver
    Official Demon's Cycle Flamed Maltese Cross logo
    Front chest Demon's print in red. Silver, red and black large logo print on the back.
     
    Cotton

    Size: Extra Large (XL)
    Learn More
  • Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

    $84.99


    BLACK 8" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application

    Black Powder coated!
    8" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     

    Learn More
  • Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    $84.99


    BLACK 10" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turnsignals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application

    Black Powder coated!
    10" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     

    Learn More
  • Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson

    $299.99

    Black 10" Rise T-Bars with Built-In LED Turn Signals
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available 

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK POWDER COATED 10" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
    Demon's Cycle Inc. design. Available only from Demon's

    Flat Black powdercoated!
    10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $499.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    499.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1344.97--

     

     

     

     

    Learn More
  • 1-1/4" Black Handlebars T-Bars with Built-In Blinkers 4.5" Rise with Hand Controls + Switches for Harley

    1-1/4" Black Handlebars T-Bars with Built-In Blinkers 4.5" Rise with Hand Controls + Switches for Harley

    $399.99

    Black 4.5" Rise T-Bars with Built-In LED Turn Signals
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are powder-coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK powder coated 4.5" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
    Demon's Cycle Inc. design. Available only from Demon's

    Flat Black Powdercoated!
    4.5" rise. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $499.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    499.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1344.97--

    Learn More
  • Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson

    $399.99

    Black 6" Rise T-Bars with Built-In LED Turn Signals
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK POWDER COATED 6" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
    Demon's Cycle Inc. design. Available only from Demon's

    Flat Black powdercoated!
    6" rise. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $499.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    499.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1344.97--

    Learn More
  • Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 8" Rise with Hand Controls + Switches for Harley-Davidson

    Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 8" Rise with Hand Controls + Switches for Harley-Davidson

    $399.99

    Black 8" Rise T-Bars with Built-In LED Turn Signals
    with Smooth-Contour Control Kit
    and Chrome Switches

    This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Switch housings use Stock HD or CC custom rounded switches.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    BLACK POWDER COATED 8" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
    Demon's Cycle Inc. design. Available only from Demon's

    Flat Black powdercoated!
    8" rise. 1 1/4"-diameter center section tapers to 1" so that standard
    handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.

    Retail $499.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.
    *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99--
    499.99--
    206.99--
    Professional Installation 235.00--
    _________________
    Total: $1344.97--

    Learn More
  • Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

    $84.99

     BLACK 6" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application
    Black Powder coated!
    6" rise. 7" backward sweep. 1-1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     
     

     

     

    Learn More
  • 2-into-1 Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins

    2-into-1 Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins 84-06 Softail 2-1

    $249.99

    TWO-IN-ONE EXHAUST
    HEAT INSULATION WRAPPED

    Styled after the classic Street-Rod side pipes, they must be seen and heard to be believed.

    1-3/4" head pipes constructed of 16 gauge steel with 3" outlet.

    Created to make a statement and make it with authority. 13/4 with a show chrome finish. Unless your neighbors are bikers too, you're going to ruffle some feathers with these pipes!

    Fits Harley-Davidson models
    with Evolution Engine
    and any Custom Application

    Made in the USA
     
    Professionally wrapped with:
    EXHAUST INSULATION WRAP
    Graphite Black
    by COOL IT ThermoTec

    Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.

    Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos.

    Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.

    Keeps exhaust heat under wraps
    Protects driver/rider/passenger and mechanics from burns


    2-into-1 wrapped exhaust on a Euro bobber

    Learn More
  • 5-1/2" Bobber Black Halogen H4 Headlight fits Harley-Davidson Motorcycles

    5 3/4" Bobber Black Custom Halogen H4 Headlight Harley Davidson Motorcycles Dyna, xl sportster

    $44.44

    Old School Classic Style Black Headlight Assembly

    All metal (not plastic!) black construction.
    Great for that clean custom look where a smooth shell is desired.

    Includes black bottom mount bolt and mounting block.
    High/Low beam.
    5-1/2" Glass Lens.
    6-1/2" x 8" Overall
    12V Halogen Bulb Included
    Accepts standard DOT H4 bulbs
    55/60W

    Fit any Harley-Davidson model and any Custom Application.

    Learn More
  • Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth S (Back)

    Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth S

    $9.99

    DOUBLE PRINT
    DEMON'S CYCLE

    YOUTH T-SHIRT

    "Faded Glory" American Flag print on the front
    Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
    Very cool!
    This shirt is a great gift idea for any future biker.

    Front and back print.
    Two color print on the back.
     
    Size: Youth Small
    Color: Black
    100% Cotton
    Made in USA

    Front


    Front print close-up

    Back

    Back print close-up

    Learn More
  • Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XL

    Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XL

    $9.99

    DOUBLE PRINT
    DEMON'S CYCLE

    YOUTH T-SHIRT

    "Faded Glory" American Flag print on the front
    Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
    Very cool!
    This shirt is a great gift idea for any future biker.

    Front and back print.
    Two color print on the back.
     
    Size: Youth Extra Large (XL)
    Color: Black
    100% Cotton
    Made in USA

    Front


    Front print close-up

    Back

    Back print close-up

    Learn More
  • Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XXL

    Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XXL

    $9.99

    DOUBLE PRINT
    DEMON'S CYCLE

    YOUTH T-SHIRT

    "Faded Glory" American Flag print on the front
    Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
    Very cool!
    This shirt is a great gift idea for any future biker.

    Front and back print.
    Two color print on the back.
     
    Size: Youth 2 Extra Large (XXL)
    Color: Black
    100% Cotton
    Made in USA

    Front


    Front print close-up

    Back

    Back print close-up

    Learn More
  • Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXL

    Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXL

    $9.99

    Demon's Cycle Logo T-Shirt

    Printed Demon's Cycle Inc. logo t-shirt
    Front and back prints in Red, Black and Silver
    Official Demon's Cycle Flamed Maltese Cross logo
    Front chest Demon's print in red. Silver, red and black large logo print on the back.
     
    Cotton

    Size: Double Extra Large (XXL) (2XL)

    Learn More
  • Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL

    Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL

    $9.99

    Demon's Cycle Logo T-Shirt

    Printed Demon's Cycle Inc. logo t-shirt
    Front and back prints in Red, Black and Silver
    Official Demon's Cycle Flamed Maltese Cross logo
    Front chest Demon's print in red. Silver, red and black large logo print on the back.
     
    Cotton

    Size: Triple Extra Large (XXXL) (3XL)

    Learn More
  • 16" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson

    16" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson

    $399.99


    Black 16" Rise Ape Hangers
    with Smooth-Contour Control Kit
    and Chrome Switches

    This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    Black 
    Apehangers
    16" Rise 1-1/4" Handlebars


    Powdercoated flat black!
    16" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.


    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  • Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

    $84.99

    BLACK 4" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application

    Black Powder coated!
    4" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     

    Learn More
  • Custom Bike Building 101 DVD

    Custom Bike Building 101 DVD

    $11.99

    Demon's Cycle South Inc. Presents:
    Custom Bike Building
    101
    DVD

    If you've ever considered building your own bike, this film's for you. It's really possible to do it yourself. This video proves it. It shows you the Step-by-Step process of custom motorcycle building. All the way from designing your future bike. We start from square one, assuming you've never picked up a wrench. Our 8 hot girls show you how to assemble your own award winning "masterpiece in metal".
    Build your confidence and avoid costly mistakes. You don't have to be a master mechanic to build a motorcycle. You'll see that even girls can do it. And it sure is fun to watch. Better believe it! All you need is this video to get you there and guide you every step of the way.

    All instructions are demonstrated and narrated by Shannon Michelle from PLAYBOY TV and the crew of Demon's Cycle South Inc., and eight (8) hot girls! This video features different types of custom motorcycles from old school choppers to Euro-style street-fighters. It also shows you how to build a 10k bike- not an overpriced 100k chopper. You'll learn simple tricks and techniques that will make the bike building or fixing process fast and painless and your future motorcycle reliable and attractive. It is also very helpful to anyone who prefers to fix his own bike without having to pay for a professional mechanic. This is your single best movie into building any custom bike. This video alone will assure your success in building any type of custom bike. Or even customizing your current bike. Let the "Demon's Cycle Girls" show you how easy and fun it really is. Get it quick and begin building it right now.

    Here is your chance to take the "insider's shortcut" into the creation of your own custom chopper. Finally, a SIMPLE dvd-based training and instruction system that gives you step-by-step instructions on how to properly and professionally assemble the bike of your dreams and fun to watch (and does it with the help of some very sexy ladies). You'll save hundreds of hours of painful frustration and senseless spending of your hard earned cash by getting this video and watching the "Demon's girls" show you how.

    This affordable video makes a great gift for any
    motorcycle enthusiast.

    FREE bonus features include:

    How to party like a player at the famous "Booby Trap" gentlemen's club. Miami. (Not R rated, but fun to watch).

    Full discount parts catalog in DVD format.

    Free high quality pics of hot models and custom motorcycles.

    Comedy - "Wrong number".

    Learn More
  • Demon's Cycle Black and Grey Polo Shirt XXL

    Demon's Cycle Black and Grey Polo Shirt XXL

    $14.99

    Demon's Cycle Black and Grey Polo Shirt

    Authentic Demon's polo shirt.
     
    Buttons.
    60% cotton 40% polyester.
     
    Color: Black with Grey stripe
     
    Featuring heraldic style print with nautical star and griffins. Scotchgard treated material in grey inserts protects from sweat.
     
    This polo shirt has so much attitude it will stand out and get the attention no matter the situation or place.
    From a biker get-together to club scene, this shirt is a hit!

    Size: XXL

    Learn More
  • Items 1 to 48 of 58 total

    per page

    Grid  List 

    Set Descending Direction

    -->

    Items 1 to 48 of 58 total

    per page
    Page:
    1. 1
    2. 2

    Grid  List 

    Set Descending Direction
    1. Bobber Chrome Headlight with Visor Light Lights fits Harley-Davidson

      Bobber Chrome Headlight with Visor Light Lights fits Harley-Davidson

      $39.99

      Visor Style Chrome Headlight Assembly

      All metal (not plastic!) triple-plated chrome construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes chrome bottom mount bolt.
      High/Low beam.
      Glass Lens.
      5" x 6-3/4"
      12V Halogen Bulb Included
      Accepts standard DOT H4 bulbs
      (Halogen light bulbs are much brighter than OEM filament lights)
       
      Wiring:
      Green - Ground
      Blue - Hi Beam
      White - Low Beam

      Fit any Harley-Davidson model and any Custom Application.

      Learn More
    2. Universal Chrome Halogen 5.5" Headlight fits Harley-Davidson Motorcycles

      Universal Chrome Halogen 5.5" Headlight fits Harley-Davidson Motorcycles

      $59.99

      Bullet Style Chrome Headlight Assembly

      All metal (not plastic!) triple-plated chrome construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes chrome bottom mount bolt and chrome post.
      High/Low beam.
      Glass Lens.
      5-1/2" lens
      7-1/2" long
      12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

      Fit any Harley-Davidson model and any Custom Application.


      Learn More
    3. Chrome Headlight for Any Metric Motorcycle Honada Yamaha Kawasali Suzuki BMW

      Chrome Headlight for Any Metric Motorcycle Honada Yamaha Kawasali Suzuki BMW

      $39.99

      Universal Visor Style Chrome Headlight Assembly

      All metal (not plastic!) triple-plated chrome construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes chrome bottom mount bolt.
      High/Low beam.
      Glass Lens.

      5" x 6-3/4"
      12V Halogen Bulb Included
      Accepts standard DOT H4 bulbs (these are much brighter than OEM filament bulbs)
       
      Green - Ground
      Blue - Hi Beam
      White - Low Beam

      Fit any Motorcycle brand (Honda, Yamaha, Suzuki, Kawasaki, BMW, Triumph) and any Custom Application.

      Learn More
    4. Shock Springs with Weld-On Tabs for Bobber Solo Seat for Harley-Davidson or Indian

      Shock Springs with Weld-On Tabs for Bobber Solo Seat for Harley-Davidson or Indian

      $84.99

      Shocks for Bobber Solo Seat
       
      La Rosa brand
       
      Billet aluminum hevy duty shock system provides comfortible ride and serious custom look.
      Hevy Duty (up to 250lbs) 4" shocks come complete with weld-on mounting tabs.

       

      Learn More
    5. 530/120 XBL O-Ring Lube Motorcycle Drive Chain for Harley-Davidson

      530/120 XBL O-Ring Lube Motorcycle Drive Chain for Harley-Davidson

      $99.99

      Ultima O-Ring Rear Drive Chain

       
      Premium quality US made rear drive motorcycle chain for Harley-Davidson.
      O-Ring Lube system seals in lube, seals out conteminants.

      530/120 size chain. XBL

      Made in the USA

      Learn More
    6. Demon's Cycle Logo and Demon Ghost Skull T-Shirt (Gray XXL)

      Demon's Cycle Logo and Demon Ghost Skull T-Shirt (Gray XXL)

      $9.99

      Demon's Cycle Designer T-Shirt
      "Logo and Demon's Ghost Skull" Double Print

      XXL size.
       
      Color: Gray with Yellow Colar. 
      Featuring Heraldic Griffins with nautical star front print (yellow and dark gray)
      Demon's ghost skull print on the back (yellow)


      This t-shirt has so much attitude it will stand out and get the attention no matter the situation or place.
      From a biker get-together to club scene, this t-shirt is a hit!
       

      Front
       

      Front print close-up 

      Back
       

      Back print close-up

      Learn More
    7. Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth M

      Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth M

      $9.99

      DOUBLE PRINT
      DEMON'S CYCLE

      YOUTH T-SHIRT

      "Faded Glory" American Flag print on the front
      Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
      Very cool!
      This shirt is a great gift idea for any future biker.

      Front and back print.
      Two color print on the back.
       
      Size: Youth Medium M(8)
      Color: Black
      100% Cotton
      Made in USA

      Front


      Front print close-up

      Back

      Back print close-up

      Learn More
    8. Demon's Cycle Black Polo Shirt L

      Demon's Cycle Black Polo Shirt L

      $17.99

      Demon's Cycle Black Polo Shirt

      Authentic Demon's polo shirt.
       
      Buttons.
       
      Color: Black
       
      Featuring heraldic style front and side prints.
       
      Coat of arms print in front, winged monster skull on the side.

      This shirt has so much attitude it will stand out and get the attention no matter the situation or place.
      From a biker get-together to club scene, this polo shirt is a hit!

      Size: L

      Learn More
    9. 530/120 O-Ring Lube Motorcycle Drive Chain for Harley-Davidson

      530/120 O-Ring Lube Motorcycle Drive Chain for Harley-Davidson

      $99.99

      Ultima O-Ring Rear Drive Chain
       
      Premium quality US made rear drive motorcycle chain for Harley-Davidson.
      O-Ring Lube system seals in lube, seals out conteminants.

      530/120 size chain. XLO

      Made in the USA

      Learn More
    10. Universal Chrome Halogen 5.5" Headlight fits Honda Yamaha Suzuki Kawasaki Motorcycles

      Universal Chrome Halogen 5.5" Headlight fits Honda Yamaha Suzuki Kawasaki Motorcycles

      $59.99

      Bullet Style Chrome Headlight Assembly

      All metal (not plastic!) triple-plated chrome construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes chrome bottom mount bolt and chrome post.
      High/Low beam.
      Glass Lens.
      5-1/2" lens
      7-1/2" long
      12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

      Fit any Harley-Davidson and Metric model and any Custom Application.


      Learn More
    11. 5-1/2" Bobber Black Halogen H4 Headlight fits Harley-Davidson Motorcycles

      5 3/4" Bobber Black Halogen H4 Headlight fits Honda Yamaha, Suzuki Kawasaki Motorcycles

      $44.44

      Old School Classic Style Black Headlight Assembly

      All metal (not plastic!) black construction.
      Great for that clean custom look where a smooth shell is desired.

      Includes black bottom mount bolt and mounting block.
      High/Low beam.
      5-1/2" Glass Lens.
      6-1/2" x 8" Overall
      12V Halogen Bulb Included
      Accepts standard DOT H4 bulbs
      55/60W

      Fit any Harley-Davidson model, Honda, Yamaha, Suzuki, Kawasaki, Victory, Triumph, BMW etc. and any Custom Application.

      Learn More
    12. Chrome out Kit El Diablo 10" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      Chrome out Kit El Diablo 10" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      $488.88

      CHROME OUT KIT "El Diablo"
      CHROME 10" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
      Chrome Switches, Chrome Grips and Chrome Mirrors

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      Here is what you are getting:

      Chrome Smooth-Contour Hand Controls
      Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available 

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.

      Retail $402.99

      ----------------------------------------------------------------

      "El Diablo" Chrome Apehangers
      10" Rise 1-1/4" Handlebars

      Triple Plated Chrome!
      10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.

      Retail $206.99

      --------------------------------------------------------------

      Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

      Retail $99.99

      --------------------------------------------------------------

      Chrome Custom Tear Drop Mirrors convex mirrors

      Retail $249.99

      ---------------------------------------------------------------

      Total package price:
      402.99
      210.99
      206.99
      99.99
      249.99

      _________________
      Total: $1405.95

       

      How to Install New Handlebar

      Ever notice how most fine artists depict the devil? They draw this demon
      from hells wings as having sharp angles. This vision was not lost on
      Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
      devil wings. No matter the imagery, we thought they have a real cool look, as
      did Navy Seaman Mario Guerrero.

      1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

      fabricated from 1 1/4-nch tubing and powder coated black.

      2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

      3. The new handlebars have oblong holes to run the control wiring in and out through.

      4.  air nozzle is used to blow the lead  string through the bars,Then a length of
      rope is attached to the string and pulled through
      the bars.

      5. The rope was used to pull the controls wire harnesses through the bars.

      6. The factory risers wer used to mount the new bars.

      7. Because the bars are T inch in diameter at  their center mounting position, a stock
      clamp was used

      8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

      9. The switch wiring exits the front of the switch housing and into the bars.

      10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

      11. These stunning bars sure remind us of devil wings.

      Learn More
    13. Chrome out Kit El Diablo 14" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      Chrome out Kit El Diablo 14" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      $488.88

      CHROME OUT KIT "El Diablo"
      CHROME 14" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
      Chrome Switches, Chrome Grips and Chrome Mirrors

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      Here is what you are getting:

      Chrome Smooth-Contour Hand Controls
      Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available 

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.

      Retail $402.99

      ----------------------------------------------------------------

      "El Diablo" Chrome Apehangers
      14" Rise 1-1/4" Handlebars

      Triple Plated Chrome!
      14" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.

      Retail $206.99

      --------------------------------------------------------------

      Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

      Retail $99.99

      --------------------------------------------------------------

      Chrome Custom Tear Drop Mirrors convex mirrors

      Retail $249.99

      ---------------------------------------------------------------

      Total package price:
      402.99
      210.99
      206.99
      99.99
      249.99

      _________________
      Total: $1405.95

       

      Learn More
    14. Chrome out Kit El Diablo 16" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      Chrome out Kit El Diablo 16" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      $488.88

      CHROME OUT KIT "El Diablo"
      CHROME 16" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
      Chrome Switches, Chrome Grips and Chrome Mirrors

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      Here is what you are getting:

      Chrome Smooth-Contour Hand Controls
      Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.

      Retail $402.99

      ----------------------------------------------------------------

      "El Diablo" Chrome Apehangers
      16" Rise 1-1/4" Handlebars

      Triple Plated Chrome!
      16" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.

      Retail $206.99

      --------------------------------------------------------------

      Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

      Retail $99.99

      --------------------------------------------------------------

      Chrome Custom Tear Drop Mirrors convex mirrors

      Retail $249.99

      ---------------------------------------------------------------

      Total package price:
      402.99
      210.99
      206.99
      99.99
      249.99

      _________________
      Total: $1405.95

       

      How to Install New Handlebar

      Ever notice how most fine artists depict the devil? They draw this demon
      from hells wings as having sharp angles. This vision was not lost on
      Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
      devil wings. No matter the imagery, we thought they have a real cool look, as
      did Navy Seaman Mario Guerrero.

      1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

      fabricated from 1 1/4-nch tubing and powder coated black.

      2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

      3. The new handlebars have oblong holes to run the control wiring in and out through.

      4.  air nozzle is used to blow the lead  string through the bars,Then a length of
      rope is attached to the string and pulled through
      the bars.

      5. The rope was used to pull the controls wire harnesses through the bars.

      6. The factory risers wer used to mount the new bars.

      7. Because the bars are T inch in diameter at  their center mounting position, a stock
      clamp was used

      8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

      9. The switch wiring exits the front of the switch housing and into the bars.

      10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

      11. These stunning bars sure remind us of devil wings.

      Learn More
    15. Chromed out Kit El Diablo 18" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      Chromed out Kit El Diablo 18" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      $488.88

      CHROME OUT KIT "El Diablo"
      CHROME 18" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
      Chrome Switches, Chrome Grips and Chrome Mirrors

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      Here is what you are getting:

      Chrome Smooth-Contour Hand Controls
      Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available 

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.

      Retail $402.99

      ----------------------------------------------------------------

      "El Diablo" Chrome Apehangers
      18" Rise 1-1/4" Handlebars

      Triple Plated Chrome!
      18" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.

      Retail $206.99

      --------------------------------------------------------------

      Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

      Retail $99.99

      --------------------------------------------------------------

      Chrome Custom Tear Drop Mirrors convex mirrors

      Retail $249.99

      ---------------------------------------------------------------

      Total package price:
      402.99
      210.99
      206.99
      99.99
      249.99

      _________________
      Total: $1405.95

       

      How to Install New Handlebar

      Ever notice how most fine artists depict the devil? They draw this demon
      from hells wings as having sharp angles. This vision was not lost on
      Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
      devil wings. No matter the imagery, we thought they have a real cool look, as
      did Navy Seaman Mario Guerrero.

      1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

      fabricated from 1 1/4-nch tubing and powder coated black.

      2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

      3. The new handlebars have oblong holes to run the control wiring in and out through.

      4.  air nozzle is used to blow the lead  string through the bars,Then a length of
      rope is attached to the string and pulled through
      the bars.

      5. The rope was used to pull the controls wire harnesses through the bars.

      6. The factory risers wer used to mount the new bars.

      7. Because the bars are T inch in diameter at  their center mounting position, a stock
      clamp was used

      8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

      9. The switch wiring exits the front of the switch housing and into the bars.

      10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

      11. These stunning bars sure remind us of devil wings.

      Learn More
    16. Demon's Cycle Heraldic Griffins with Nautical Star and Demon Skull T-Shirt (Grey and Navy 2XL)

      Demon's Cycle Heraldic Griffins with Nautical Star and Demon Skull T-Shirt (Grey and Navy 2XL)

      $9.99

      Demon's Cycle Designer T-Shirt
      "Heraldic Griffins with Nautical Star and Demon's Skull" Double Print

      Color: Grey (with Navy collar and sleeves) 
      Featuring vintage heraldic style front two tone print (Navy / gray)
      Demon's skull print on the back (Navy)


      This t-shirt has so much attitude it will stand out and get the attention no matter the situation or place.
      From a biker get-together to club scene, this t-shirt is a hit!
       

      Front
       

      Back

      Learn More
    17. Demon's Cycle Long Sleeve T-Shirt. Pompano Beach Skull. Front and Back Print White XL

      Demon's Cycle Long Sleeve T-Shirt. Pompano Beach Skull. Front and Back Print White XL

      $19.99

      Demon's Cycle Logo Long Sleeve T-Shirt

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Black
      Official Demon's Cycle logo print on front chest
      Patch-like Demon's Cycle Pompano Beach, FL with evil rider skull black print on the back.

      Size XL
       
      100% Soft Ring Spun Cotton
      Made in USA 

       

      Size: Extra Large (XL)
      Learn More
    18. Demon's Cycle Long Sleeve T-Shirt. Pompano Beach Skull. Front and Back Print White L

      Demon's Cycle Long Sleeve T-Shirt. Pompano Beach Skull. Front and Back Print White L

      $19.99

      Demon's Cycle Logo Long Sleeve T-Shirt

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Black
      Official Demon's Cycle logo print on front chest
      Patch-like Demon's Cycle Pompano Beach, FL with evil rider skull black print on the back.

      Size L
       
      100% Soft Ring Spun Cotton
      Made in USA 

       

      Size: Large (L)
      Learn More
    19. Chrome out Kit El Diablo 12" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      Chrome out Kit El Diablo 12" Chrome Ape Hangers with Chrome Hand Controls Switches Grips and Mirrors for Harley-Davidson

      $488.88

      CHROME OUT KIT "El Diablo"
      CHROME 12" Rise Ape Hangers with Chrome Smooth-Contour Control Kit
      Chrome Switches, Chrome Grips and Chrome Mirrors

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      Here is what you are getting:

      Chrome Smooth-Contour Hand Controls
      Unique design has hidden underside mounting on the switch housings for an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND FINISH THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.

      Retail $402.99

      ----------------------------------------------------------------

      "El Diablo" Chrome Apehangers
      12" Rise 1-1/4" Handlebars

      Triple Plated Chrome!
      12" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.

      Retail $206.99

      --------------------------------------------------------------

      Chrome Billet Aluminum "Swiss Cheese" Custom Hand Grips

      Retail $99.99

      --------------------------------------------------------------

      Chrome Custom Tear Drop Mirrors convex mirrors

      Retail $249.99

      ---------------------------------------------------------------

      Total package price:
      402.99
      210.99
      206.99
      99.99
      249.99

      _________________
      Total: $1405.95

       

      How to Install New Handlebar

      Ever notice how most fine artists depict the devil? They draw this demon
      from hells wings as having sharp angles. This vision was not lost on
      Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
      devil wings. No matter the imagery, we thought they have a real cool look, as
      did Navy Seaman Mario Guerrero.

      1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

      fabricated from 1 1/4-nch tubing and powder coated black.

      2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

      3. The new handlebars have oblong holes to run the control wiring in and out through.

      4.  air nozzle is used to blow the lead  string through the bars,Then a length of
      rope is attached to the string and pulled through
      the bars.

      5. The rope was used to pull the controls wire harnesses through the bars.

      6. The factory risers wer used to mount the new bars.

      7. Because the bars are T inch in diameter at  their center mounting position, a stock
      clamp was used

      8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

      9. The switch wiring exits the front of the switch housing and into the bars.

      10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

      11. These stunning bars sure remind us of devil wings.

      Learn More
    20. Universal Polished Billet Halogen 4 3/4" Headlight with Grille fits Harley-Davidson Motorcycles

      Universal Polished Billet Halogen 4 3/4" Headlight with Grille fits Harley-Davidson Motorcycles

      $99.00

      Bullet Style  Powder coated Headlight Assembly With Polished Grille

      All  Heavy Duty Aluminum  (not plastic!) Beautifully Polished construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes Chrome bottom mount bolt and Black post.
      High/Low beam.
      Glass Lens with Polished Grille!

      6.5" DIAMETER BODY X 5.5" DEEP.

      4 3/4"" DAIMETER GLASS LENS

      12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

      Fit any Harley-Davidson model and any Custom Application.

      Learn More
    21. Bobber Solo Seat for Harley-Davidson or Indian Brown Laced Leather With Skirt

      Bobber Solo Seat for Harley-Davidson or Indian Brown Laced Leather With Skirt

      $189.00

      Custom Hand-Made Show Quality
      Brown Bobber Solo Leather Seat with Skirt
       
      Demon's Cycle brand

      This is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
      The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.

      The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.
       
      Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.
      Polished mounting hardware is included.

      Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.

       

       

       

       

       


      Solo seat by La Rosa on Harley-Davidson

      Learn More
    22. Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather and Passenger Pad

      Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather and Passenger Pad

      $235.00

      Custom Hand-Made Show Quality
      Bobber Solo Leather Seat with Passenger Pad
       
      Demon's Cycle brand

      This is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
      The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.

      The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.
       
      Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.
      Polished mounting hardware is included.
       
      Suction Cup Back Passenger Pad.

      Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.

       

       

       

       


      Solo seat by La Rosa on Harley-Davidson

      Learn More
    23. Bobber Solo Seat for Harley-Davidson or Indian Brown Laced Leather and Passenger Pad

      Bobber Solo Seat for Harley-Davidson or Indian Brown Laced Leather and Passenger Pad

      $235.00

      Custom Hand-Made Show Quality
      Brown Bobber Solo Leather Seat with Passenger Pad
       
      Demon's Cycle brand

      This is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
      The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.

      The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.
       
      Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.
      Polished mounting hardware is included.
       
      Suction Cup Back Passenger Pad.

      Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.

       

       

       


      Solo seat by La Rosa on Harley-Davidson

      Learn More
    24. Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather With Skirt and Passenger Pad

      Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather With Skirt and Passenger Pad

      $235.00

      Custom Hand-Made Show Quality
      Bobber Solo Leather Seat with Skirt and Passenger Pad
       
      Demon's Cycle brand

      This is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
      The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.

      The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.
       
      Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.
      Polished mounting hardware is included.
       
      Suction Cup Back Passenger Pad.

      Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.

       

       

       


      Solo seat by La Rosa on Harley-Davidson

      Solo seat by La Rosa on Harley-Davidson

      Learn More
    25. Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather With Skirt

      Bobber Solo Seat for Harley-Davidson or Indian Black Laced Leather With Skirt

      $179.00

      Custom Hand-Made Show Quality
      Black Bobber Solo Leather Seat with Skirt
       
      Demon's Cycle brand

      This is not your average motorcycle seat. This show piece is hand crafted from the scratch to satisfy the most demanding bike builders.
      The construction starts with 1/4" thick T-6 6061 Billet plate that forms incredibly sturdy and rust proof seat pan. The seat pan is high polished and riveted.

      The seat is covered with the top quality, thick genuine leather. Hand tooled and laced.
       
      Quality of this seat is second to none. No shortcuts were taken in the manufacturing process.
      Polished mounting hardware is included.

      Seat measures: 16" long. 12" wide. 7" rear mounts distance. Front mount is adjustable.

       

       

       

       

       


      Solo seat by La Rosa on Harley-Davidson


      Solo seat by La Rosa on Harley-Davidson

      Learn More
    26. Universal Polished Halogen 4 3/4" Headlight with Billet Grille fits Harley-Davidson Motorcycles

      Universal Polished Halogen 4 3/4" Headlight with Billet Grille fits Harley-Davidson Motorcycles

      $99.00

      Bullet Style Polished Headlight Assembly

      All  Heavy Duty Aluminum  (not plastic!) Beautifully Polished construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes Polished bottom mount bolt and Polished post.
      High/Low beam.
      Glass Lens with Grille!

      6.5" DIAMETER BODY X 7.5" DEEP.

      5 3/4"" DAIMETER GLASS LENS

      12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

      Fit any Harley-Davidson model and any Custom Application.

      Learn More
    27. Universal Powder Coated Black Grille Halogen 4 3/4" Billet Headlight with Grille fits Harley-Davidson Motorcycles

      Universal Powder Coated Black Grille Halogen 4 3/4" Billet Headlight with Grille fits Harley-Davidson Motorcycles

      $99.00

      Bullet Style Powder Coated Black Headlight Assembly

      All  Heavy Duty Aluminum  (not plastic!) Beautifully Powder coated construction.
      Great for that clean custom look where a shell mounted high beam indicator is not desired.
      Includes Black bottom mount bolt and Black post.
      High/Low beam.
      Glass Lens with Grille!

      6.5" DIAMETER BODY X 5.5" DEEP.

      4 3/4"" DAIMETER GLASS LENS

      12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

      Fit any Harley-Davidson model and any Custom Application.

      Learn More
    28. Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL + DVD COMBO

      Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL + DVD COMBO

      $15.00

      COMBO!
      Demon's Cycle Logo T-Shirt +
      Custom Bike Building 101 DVD

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Red, Black and Silver
      Official Demon's Cycle Flamed Maltese Cross logo
      Front chest Demon's print in red. Silver, red and black large logo print on the back.
       
      Cotton

       

      AND

      Demon's Cycle South Inc. Presents:
      Custom Bike Building
      101
      DVD

      If you've ever considered building your own bike, this film's for you. It's really possible to do it yourself. This video proves it. It shows you the Step-by-Step process of custom motorcycle building. All the way from designing your future bike. We start from square one, assuming you've never picked up a wrench. Our 8 hot girls show you how to assemble your own award winning "masterpiece in metal".
      Build your confidence and avoid costly mistakes. You don't have to be a master mechanic to build a motorcycle. You'll see that even girls can do it. And it sure is fun to watch. Better believe it! All you need is this video to get you there and guide you every step of the way.

      All instructions are demonstrated and narrated by Shannon Michelle from PLAYBOY TV and the crew of Demon's Cycle South Inc., and eight (8) hot girls! This video features different types of custom motorcycles from old school choppers to Euro-style street-fighters. It also shows you how to build a 10k bike- not an overpriced 100k chopper. You'll learn simple tricks and techniques that will make the bike building or fixing process fast and painless and your future motorcycle reliable and attractive. It is also very helpful to anyone who prefers to fix his own bike without having to pay for a professional mechanic. This is your single best movie into building any custom bike. This video alone will assure your success in building any type of custom bike. Or even customizing your current bike. Let the "Demon's Cycle Girls" show you how easy and fun it really is. Get it quick and begin building it right now.

      Here is your chance to take the "insider's shortcut" into the creation of your own custom chopper. Finally, a SIMPLE dvd-based training and instruction system that gives you step-by-step instructions on how to properly and professionally assemble the bike of your dreams and fun to watch (and does it with the help of some very sexy ladies). You'll save hundreds of hours of painful frustration and senseless spending of your hard earned cash by getting this video and watching the "Demon's girls" show you how.

      This affordable video makes a great gift for any
      motorcycle enthusiast.

      FREE bonus features include:

      How to party like a player at the famous "Booby Trap" gentlemen's club. Miami. (Not R rated, but fun to watch).

      Full discount parts catalog in DVD format.

      Free high quality pics of hot models and custom motorcycles.

      Comedy - "Wrong number".

      Size: AVAILABLE IN
      XL
      XXL
      XXXL
      Please specify in comment on check out
      Learn More
    29. Demon's Cycle Logo Ladies T-Shirt "High Maintenance" White Large

      Demon's Cycle Logo Ladies T-Shirt "High Maintenance" White Large

      $14.99


      DEMON'S CYCLE LADIE'S T-SHIRT

      This is a Brand New 100% Cotton shirt with "High Maintenance" cute biker girl skull and bones graphics and Demon's Cycle logo print on the chest.

      This shirt is a great gift idea.

      Tee shirt is brand new.
      Color - White.
      Style - Short sleeve
       
      Size Large

      Learn More
    30. Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XL

      Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XL

      $9.99

      Demon's Cycle Logo T-Shirt

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Red, Black and Silver
      Official Demon's Cycle Flamed Maltese Cross logo
      Front chest Demon's print in red. Silver, red and black large logo print on the back.
       
      Cotton

      Size: Extra Large (XL)
      Learn More
    31. Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

      Black 1-1/4" Drag Handlebars 8" Rise with LED Turn Signals fit Harley-Davidson

      $84.99


      BLACK 8" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
       
      Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
      To fit Harley-Davidson motorcycles and Custom Application

      Black Powder coated!
      8" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.
       

      Learn More
    32. Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

      Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

      $84.99


      BLACK 10" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
       
      Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turnsignals with internal wiring.
      To fit Harley-Davidson motorcycles and Custom Application

      Black Powder coated!
      10" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.
       

      Learn More
    33. Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson

      Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson

      $299.99

      Black 10" Rise T-Bars with Built-In LED Turn Signals
      with Smooth-Contour Control Kit
      and Chrome Switches

      This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
      Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

      This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

      Here is what you are getting:

      Smooth-Contour Hand Controls
      Switch housings use Stock HD or CC custom rounded switches.
      BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)
      Hydraulic Hand controls also Available 

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.


      Retail $402.99

      ----------------------------------------------------------------


      BLACK POWDER COATED 10" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
      Demon's Cycle Inc. design. Available only from Demon's

      Flat Black powdercoated!
      10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
      handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $499.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.
      *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


      Retail $206.99

      ---------------------------------------------------------------

      Total package price: 402.99--
      499.99--
      206.99--
      Professional Installation 235.00--
      _________________
      Total: $1344.97--

       

       

       

       

      Learn More
    34. 1-1/4" Black Handlebars T-Bars with Built-In Blinkers 4.5" Rise with Hand Controls + Switches for Harley

      1-1/4" Black Handlebars T-Bars with Built-In Blinkers 4.5" Rise with Hand Controls + Switches for Harley

      $399.99

      Black 4.5" Rise T-Bars with Built-In LED Turn Signals
      with Smooth-Contour Control Kit
      and Chrome Switches

      This auction is for complete 1-1/4" handlebar set-up. All components are powder-coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
      Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

      This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

      Here is what you are getting:

      Smooth-Contour Hand Controls
      Switch housings use Stock HD or CC custom rounded switches.
      BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.


      Retail $402.99

      ----------------------------------------------------------------


      BLACK powder coated 4.5" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
      Demon's Cycle Inc. design. Available only from Demon's

      Flat Black Powdercoated!
      4.5" rise. 1 1/4"-diameter center section tapers to 1" so that standard
      handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $499.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.
      *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


      Retail $206.99

      ---------------------------------------------------------------

      Total package price: 402.99--
      499.99--
      206.99--
      Professional Installation 235.00--
      _________________
      Total: $1344.97--

      Learn More
    35. Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson

      Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson

      $399.99

      Black 6" Rise T-Bars with Built-In LED Turn Signals
      with Smooth-Contour Control Kit
      and Chrome Switches

      This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
      Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

      This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

      Here is what you are getting:

      Smooth-Contour Hand Controls
      Switch housings use Stock HD or CC custom rounded switches.
      BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.


      Retail $402.99

      ----------------------------------------------------------------


      BLACK POWDER COATED 6" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
      Demon's Cycle Inc. design. Available only from Demon's

      Flat Black powdercoated!
      6" rise. 1 1/4"-diameter center section tapers to 1" so that standard
      handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $499.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.
      *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


      Retail $206.99

      ---------------------------------------------------------------

      Total package price: 402.99--
      499.99--
      206.99--
      Professional Installation 235.00--
      _________________
      Total: $1344.97--

      Learn More
    36. Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 8" Rise with Hand Controls + Switches for Harley-Davidson

      Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 8" Rise with Hand Controls + Switches for Harley-Davidson

      $399.99

      Black 8" Rise T-Bars with Built-In LED Turn Signals
      with Smooth-Contour Control Kit
      and Chrome Switches

      This auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
      Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

      This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

      Here is what you are getting:

      Smooth-Contour Hand Controls
      Switch housings use Stock HD or CC custom rounded switches.
      BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.


      Retail $402.99

      ----------------------------------------------------------------


      BLACK POWDER COATED 8" Rise  1-1/4" T-Bars with Built-In L.E.D. Turn Signals
      Demon's Cycle Inc. design. Available only from Demon's

      Flat Black powdercoated!
      8" rise. 1 1/4"-diameter center section tapers to 1" so that standard
      handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.

      Retail $499.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.
      *If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.


      Retail $206.99

      ---------------------------------------------------------------

      Total package price: 402.99--
      499.99--
      206.99--
      Professional Installation 235.00--
      _________________
      Total: $1344.97--

      Learn More
    37. Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

      Black 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson

      $84.99

       BLACK 6" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
       
      Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
      To fit Harley-Davidson motorcycles and Custom Application
      Black Powder coated!
      6" rise. 7" backward sweep. 1-1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.
       
       

       

       

      Learn More
    38. 2-into-1 Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins

      2-into-1 Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins 84-06 Softail 2-1

      $249.99

      TWO-IN-ONE EXHAUST
      HEAT INSULATION WRAPPED

      Styled after the classic Street-Rod side pipes, they must be seen and heard to be believed.

      1-3/4" head pipes constructed of 16 gauge steel with 3" outlet.

      Created to make a statement and make it with authority. 13/4 with a show chrome finish. Unless your neighbors are bikers too, you're going to ruffle some feathers with these pipes!

      Fits Harley-Davidson models
      with Evolution Engine
      and any Custom Application

      Made in the USA
       
      Professionally wrapped with:
      EXHAUST INSULATION WRAP
      Graphite Black
      by COOL IT ThermoTec

      Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.

      Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos.

      Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.

      Keeps exhaust heat under wraps
      Protects driver/rider/passenger and mechanics from burns


      2-into-1 wrapped exhaust on a Euro bobber

      Learn More
    39. 5-1/2" Bobber Black Halogen H4 Headlight fits Harley-Davidson Motorcycles

      5 3/4" Bobber Black Custom Halogen H4 Headlight Harley Davidson Motorcycles Dyna, xl sportster

      $44.44

      Old School Classic Style Black Headlight Assembly

      All metal (not plastic!) black construction.
      Great for that clean custom look where a smooth shell is desired.

      Includes black bottom mount bolt and mounting block.
      High/Low beam.
      5-1/2" Glass Lens.
      6-1/2" x 8" Overall
      12V Halogen Bulb Included
      Accepts standard DOT H4 bulbs
      55/60W

      Fit any Harley-Davidson model and any Custom Application.

      Learn More
    40. Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth S (Back)

      Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth S

      $9.99

      DOUBLE PRINT
      DEMON'S CYCLE

      YOUTH T-SHIRT

      "Faded Glory" American Flag print on the front
      Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
      Very cool!
      This shirt is a great gift idea for any future biker.

      Front and back print.
      Two color print on the back.
       
      Size: Youth Small
      Color: Black
      100% Cotton
      Made in USA

      Front


      Front print close-up

      Back

      Back print close-up

      Learn More
    41. Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XL

      Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XL

      $9.99

      DOUBLE PRINT
      DEMON'S CYCLE

      YOUTH T-SHIRT

      "Faded Glory" American Flag print on the front
      Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
      Very cool!
      This shirt is a great gift idea for any future biker.

      Front and back print.
      Two color print on the back.
       
      Size: Youth Extra Large (XL)
      Color: Black
      100% Cotton
      Made in USA

      Front


      Front print close-up

      Back

      Back print close-up

      Learn More
    42. Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XXL

      Demon's Cycle Black T-Shirt Faded Glory Pompano Beach FL Pilot Skull and Wings Youth XXL

      $9.99

      DOUBLE PRINT
      DEMON'S CYCLE

      YOUTH T-SHIRT

      "Faded Glory" American Flag print on the front
      Demon's Cycle Pompano Beach, FL patch style print with vintage pilot skull and wings print on the back.
      Very cool!
      This shirt is a great gift idea for any future biker.

      Front and back print.
      Two color print on the back.
       
      Size: Youth 2 Extra Large (XXL)
      Color: Black
      100% Cotton
      Made in USA

      Front


      Front print close-up

      Back

      Back print close-up

      Learn More
    43. Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXL

      Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXL

      $9.99

      Demon's Cycle Logo T-Shirt

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Red, Black and Silver
      Official Demon's Cycle Flamed Maltese Cross logo
      Front chest Demon's print in red. Silver, red and black large logo print on the back.
       
      Cotton

      Size: Double Extra Large (XXL) (2XL)

      Learn More
    44. Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL

      Demon's Cycle Logo T-Shirt. Flamed Maltese Cross. Front and Back Print Black XXXL

      $9.99

      Demon's Cycle Logo T-Shirt

      Printed Demon's Cycle Inc. logo t-shirt
      Front and back prints in Red, Black and Silver
      Official Demon's Cycle Flamed Maltese Cross logo
      Front chest Demon's print in red. Silver, red and black large logo print on the back.
       
      Cotton

      Size: Triple Extra Large (XXXL) (3XL)

      Learn More
    45. 16" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson

      16" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson

      $399.99


      Black 16" Rise Ape Hangers
      with Smooth-Contour Control Kit
      and Chrome Switches

      This listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

      All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
      Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

      This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

      Here is what you are getting:

      Smooth-Contour Hand Controls
      Unique design has hidden underside mounting
      on the switch housings for
      an unobstructed smooth, rounded surface on the top housing.
      BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
      9/16" Bore master cylinder. For Single disc application
      (Please contact us first if you are looking for a dual disc set-up)

      This is top quality kit.
      Much higher quality than HD or any aftermarket product. Simply the best.
      Made in U.S.A.


      Retail $402.99

      ----------------------------------------------------------------


      Black 
      Apehangers
      16" Rise 1-1/4" Handlebars


      Powdercoated flat black!
      16" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
      36" wide from tip to tip. Bars are dimpled for late control wiring.
      Come with drilled wiring hols.

      Retail $210.99

      --------------------------------------------------------------

      Chrome Switches and Wire Harness

      High quality USA made chrome switches for hand controls.
      Wires are soldered and color-coded for easy installation.


      Retail $206.99

      ---------------------------------------------------------------

      Total package price: 402.99
      210.99
      206.99
      Professional Installation 235.00
      _________________
      Total: $1055.97

      How to Install New Handlebar

      Ever notice how most fine artists depict the devil? They draw this demon
      from hells wings as having sharp angles. This vision was not lost on
      Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
      devil wings. No matter the imagery, we thought they have a real cool look, as
      did Navy Seaman Mario Guerrero.

      1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

      fabricated from 1 1/4-nch tubing and powder coated black.

      2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

      3. The new handlebars have oblong holes to run the control wiring in and out through.

      4.  air nozzle is used to blow the lead  string through the bars,Then a length of
      rope is attached to the string and pulled through
      the bars.

      5. The rope was used to pull the controls wire harnesses through the bars.

      6. The factory risers wer used to mount the new bars.

      7. Because the bars are T inch in diameter at  their center mounting position, a stock
      clamp was used

      8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

      9. The switch wiring exits the front of the switch housing and into the bars.

      10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

      11. These stunning bars sure remind us of devil wings.

      Learn More
    46. Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

      Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

      $84.99

      BLACK 4" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
       
      Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
      To fit Harley-Davidson motorcycles and Custom Application

      Black Powder coated!
      4" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
      Come with drilled wiring holes.
       

      Learn More
    47. Custom Bike Building 101 DVD

      Custom Bike Building 101 DVD

      $11.99

      Demon's Cycle South Inc. Presents:
      Custom Bike Building
      101
      DVD

      If you've ever considered building your own bike, this film's for you. It's really possible to do it yourself. This video proves it. It shows you the Step-by-Step process of custom motorcycle building. All the way from designing your future bike. We start from square one, assuming you've never picked up a wrench. Our 8 hot girls show you how to assemble your own award winning "masterpiece in metal".
      Build your confidence and avoid costly mistakes. You don't have to be a master mechanic to build a motorcycle. You'll see that even girls can do it. And it sure is fun to watch. Better believe it! All you need is this video to get you there and guide you every step of the way.

      All instructions are demonstrated and narrated by Shannon Michelle from PLAYBOY TV and the crew of Demon's Cycle South Inc., and eight (8) hot girls! This video features different types of custom motorcycles from old school choppers to Euro-style street-fighters. It also shows you how to build a 10k bike- not an overpriced 100k chopper. You'll learn simple tricks and techniques that will make the bike building or fixing process fast and painless and your future motorcycle reliable and attractive. It is also very helpful to anyone who prefers to fix his own bike without having to pay for a professional mechanic. This is your single best movie into building any custom bike. This video alone will assure your success in building any type of custom bike. Or even customizing your current bike. Let the "Demon's Cycle Girls" show you how easy and fun it really is. Get it quick and begin building it right now.

      Here is your chance to take the "insider's shortcut" into the creation of your own custom chopper. Finally, a SIMPLE dvd-based training and instruction system that gives you step-by-step instructions on how to properly and professionally assemble the bike of your dreams and fun to watch (and does it with the help of some very sexy ladies). You'll save hundreds of hours of painful frustration and senseless spending of your hard earned cash by getting this video and watching the "Demon's girls" show you how.

      This affordable video makes a great gift for any
      motorcycle enthusiast.

      FREE bonus features include:

      How to party like a player at the famous "Booby Trap" gentlemen's club. Miami. (Not R rated, but fun to watch).

      Full discount parts catalog in DVD format.

      Free high quality pics of hot models and custom motorcycles.

      Comedy - "Wrong number".

      Learn More
    48. Demon's Cycle Black and Grey Polo Shirt XXL

      Demon's Cycle Black and Grey Polo Shirt XXL

      $14.99

      Demon's Cycle Black and Grey Polo Shirt

      Authentic Demon's polo shirt.
       
      Buttons.
      60% cotton 40% polyester.
       
      Color: Black with Grey stripe
       
      Featuring heraldic style print with nautical star and griffins. Scotchgard treated material in grey inserts protects from sweat.
       
      This polo shirt has so much attitude it will stand out and get the attention no matter the situation or place.
      From a biker get-together to club scene, this shirt is a hit!

      Size: XXL

      Learn More

    Items 1 to 48 of 58 total

    per page
    Page:
    1. 1
    2. 2

    Grid  List 

    Set Descending Direction