Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

Clearance

18 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Black 12" Rise Universal Ape Hangers "Frisco" Chubby's 1-1/4" Diameter Handlebars Harley Motorcycles

    Black 12" Rise Universal Ape Hangers "Frisco" Chubby's 1-1/4" Diameter Handlebars Harley Motorcycles

    $99.99

    "CHUBBY FRISCO" BLACK UNIVERSAL APEHANGERS
    12" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL, including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Black Powdercoated!
    12" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Black finish

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  2. Chrome 9" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    Chrome 12" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

    $99.99

    "CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
    12" Rise 1-1/4" Handlebars


    To fit Harley-Davidson FLST, FXST, Sportster XL, including Throttle-by-wire models, and any custom application.
     
    Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
     
    Triple plated chrome!
    12" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
    3-1/2 on-center knurling for firm mounting.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.
     
    Chrome finish

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4-nch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Learn More
  3. Chrome Billet Fork Cups for Harley-Davidson Frame Necks 1" Stems

    Chrome Billet Fork Cups for Harley-Davidson Frame Necks 1" Stems

    $28.90

    2 BILLET CHROME FRAME FORK CUPS

    These 2 billet chrome frame fork cups will fit most
    Big Twins and Custom frames
    from 1960 to Present.

    for 1" stem

    These nice triple plated fork cups retail for $58.99 US
    and we sell for a fraction of the cost.
    A "must have" for any Custom Bike builder.

    Learn More
  4. Stradalli Bicycle Multi-functional Tool Kit Mechanics 16 in 1 Set

    Stradalli Bicycle Multi-functional Tool Kit Mechanics 16 in 1 Set

    $7.49

    16 in 1 Repair Tool Kit:
    - Socket Wrench: 8/9/10 mm
    - Allen Wrench: 2/2.5/3/4/5/6 mm
    - Slot type screwdriver
    - Phillips screwdriver
    - Socket extension rod
    - Flat wrench 8/10/15 mm
    - Inner hexagon spanner 3/4/5/2/2.5/6 mm
    - Spoke wrench

    Learn More
  5. Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    $77.77

    BLACK BILLET DUAL BEAM HEADLIGHT

    Billet aluminum housing with glass lens and billet aluminum mounting block. NOT a cheap plastic headlight!
     
    Custom smooth wave style dual headlight features:

    Size:
    Width - 6-1/4"
    Height - 2-3/4"
    Length - 5"
    Mounting extension - 2-1/2"
    Mounting block - 1-3/4" high 3-7/8" wide

    Includes adjustable black mounting block.

    2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

    Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

    Great custom style and unsurpassed performance.

    Fits Harley-Davidson models
    Custom motorcycles and Choppers
    Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.


    Same headlight in chrome finish on one of the Demon's custom motorcycles.

    Learn More
  6. Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    $75.00

    BLACK BILLET DUAL BEAM HEADLIGHT

    Billet aluminum housing with glass lens and billet aluminum mounting block. NOT a cheap plastic headlight!
     
    Custom smooth wave style dual headlight features:

    Size:
    Width - 6-1/4"
    Height - 2-3/4"
    Length - 5"
    Mounting extension - 2-1/2"
    Mounting block - 1-3/4" high 3-7/8" wide

    Includes adjustable black mounting block.

    2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

    Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

    Great custom style and unsurpassed performance.

    Fits Harley-Davidson models
    Custom motorcycles and Choppers
    Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.


    Same headlight in chrome finish on one of the Demon's custom motorcycles.

    Learn More
  7. Express Order Processing "TOP PRIORITY"  Puts your order ahead of the line.

    Express Order Processing "TOP PRIORITY" Puts your order ahead of the line.

    $2.95

    Express Order Processing puts your order ahead of the line. With this option your order will be marked as a TOP PRIORITY and processed immediately after placement.

    Learn More
  8. Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    Dual "Wave" ET Custom Headlight Black for Any Motorcycle

    $74.44

    BLACK BILLET DUAL BEAM HEADLIGHT

    Billet aluminum housing with glass lens and billet aluminum mounting block. NOT a cheap plastic headlight!
     
    Custom smooth wave style dual headlight features:

    Size:
    Width - 6-1/4"
    Height - 2-3/4"
    Length - 5"
    Mounting extension - 2-1/2"
    Mounting block - 1-3/4" high 3-7/8" wide

    Includes adjustable black mounting block.

    2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

    Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

    Great custom style and unsurpassed performance.

    Fits Harley-Davidson models
    Custom motorcycles and Choppers
    Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.


    Same headlight in chrome finish on one of the Demon's custom motorcycles.

    Learn More
  9. Chrome Billet Custom Headlight 5-3/4" Tri-Bar DOT for Harley-Davidson Motorcycles tribar

    Chrome Billet Custom Headlight 5.75" Tri-Bar DOT for Harley-Davidson Motorcycles tribar

    $85.00

    Chrome Billet
    Complete Chrome Tri-Bar
    Headlamp Assembly

    Lean, mean, clean styling in a chrome 5-3/4" headlight assembly machined from billet aluminum with a hooded rim design.
    9" overall length
    6" overall width

    Includes the mounting block and 55/60W H4 halogen bulb. High/Low beam.
    Billet headlights like this one retail anywhere from $165 to $600. This is your chance to buy the same for the fraction of the cost.

    DOT approved and marked.

    Fits Harley-Davidson models
    and any custom application even springers
    can also be used on Honda, Yamaha, Kawasaki, Suzuki, Victory.

    Learn More
  10. Universal Chrome Halogen 5.5" Headlight fits Honda Yamaha Suzuki Kawasaki Motorcycles

    Universal Chrome Halogen 5.5" Headlight fits Honda Yamaha Suzuki Kawasaki Motorcycles

    $59.99

    Bullet Style Chrome Headlight Assembly

    All metal (not plastic!) triple-plated chrome construction.
    Great for that clean custom look where a shell mounted high beam indicator is not desired.
    Includes chrome bottom mount bolt and chrome post.
    High/Low beam.
    Glass Lens.
    5-1/2" lens
    7-1/2" long
    12V Dual Filament Halogen H4 Bulb Included (12V 60/55W)

    Fit any Harley-Davidson and Metric model and any Custom Application.


    Learn More
  11. Bobber Gloss Black Headlight with Visor Light Lights fits Harley-Davidson Motorcycle

    Bobber Gloss Black Headlight with Visor Light Lights fits Harley-Davidson Motorcycle

    $44.44

    Bullet Visor Style Gloss Black Headlight Assembly

    All metal (not plastic!) powdercoated gloss black construction.
    Great for that clean custom look where a shell mounted high beam indicator is not desired.
    Includes black bottom mount bolt.
    High/Low beam.
    4.5" Glass Lens.
    5" x 6-3/4" Overall
    12V Halogen Bulb Included
    Accepts standard DOT H4 bulbs
     
    Green - Ground
    Blue - Hi Beam
    White - Low Beam

    Fit any Harley-Davidson model and any Custom Application.

    Learn More
  12. Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson

    $84.99


    BLACK 10" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turnsignals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application

    Black Powder coated!
    10" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     

    Learn More
  13. Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

    Black 1-1/4" Drag Handlebars 4" Rise with LED Turn Signals fit Harley-Davidson

    $84.99

    BLACK 4" Rise 1-1/4" T-Bars with Built-In LED Turn Signals
     
    Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.
    To fit Harley-Davidson motorcycles and Custom Application

    Black Powder coated!
    4" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
    Come with drilled wiring holes.
     

    Learn More
  14. Express Order Processing "TOP PRIORITY"  Puts your order ahead of the line.

    Express Order Processing "TOP PRIORITY" Puts your order ahead of the line.

    $1.95

    Express Order Processing puts your order ahead of the line. With this option your order will be marked as a TOP PRIORITY and processed immediately after placement.

    Learn More
  15. Billet Aluminum Final Drive Belt Pulley for Harley Motorcycles 70 Tooth 1-1/2" Blank

    Billet Aluminum Final Drive Belt Pulley for Harley Motorcycles 70 Tooth 1-1/2" Blank

    $95.00

    BILLET ALUMINUM REAR DRIVE BELT PULLEY BLANK for Harley-Davidson 70 TOOTH 1.5" FITS BIG TWIN 1984-99 HARLEY BIG TWIN MODELS AND CUSTOM APPLICATION. This is a brand new billet aluminum pulley for custom application. Raw Aluminum. It can be polished, cut, chromed, painted or airbrushed to match your bike's paint job. Bolt pattern is not drilled, so it can be drilled for any wheel bolt pattern. 2 for 180

    Product ID = 1291

    Learn More
  16. Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    $79.99

    BLACK BILLET DUAL BEAM HEADLIGHT

    Billet aluminum housing with glass lens and billet aluminum mounting block. NOT a cheap plastic headlight!
     
    Custom smooth wave style dual headlight features:

    Size:
    Width - 6-1/4"
    Height - 2-3/4"
    Length - 5"
    Mounting extension - 2-1/2"
    Mounting block - 1-3/4" high 3-7/8" wide

    Includes adjustable black mounting block.

    2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

    Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

    Great custom style and unsurpassed performance.

    Fits Harley-Davidson models
    Custom motorcycles and Choppers
    Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.


    Same headlight in chrome finish on one of the Demon's custom motorcycles.

     

    Learn More
  17. Chrome Billet Custom Headlight 5-3/4" Tri-Bar DOT for Harley-Davidson Motorcycles tribar

    Chrome Billet Custom Headlight 5-3/4" Tri-Bar DOT for Harley-Davidson Motorcycles tribar

    $88.88

    Chrome Billet
    Complete Chrome Tri-Bar
    Headlamp Assembly

    Lean, mean, clean styling in a chrome 5-3/4" headlight assembly machined from billet aluminum with a hooded rim design.
    9" overall length
    6" overall width

    Includes the mounting block and 55/60W H4 halogen bulb. High/Low beam.
    Billet headlights like this one retail anywhere from $165 to $600. This is your chance to buy the same for the fraction of the cost.

    DOT approved and marked.

    Fits Harley-Davidson models
    and any custom application even springers
    can also be used on Honda, Yamaha, Kawasaki, Suzuki, Victory.

    Learn More
  18. Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    Dual "Wave" ET Custom Headlight Black for Harley-Davidson and Any Motorcycle

    $64.99

    BLACK BILLET DUAL BEAM HEADLIGHT

    Billet aluminum housing with glass lens and billet aluminum mounting block. NOT a cheap plastic headlight!
     
    Custom smooth wave style dual headlight features:

    Size:
    Width - 6-1/4"
    Height - 2-3/4"
    Length - 5"
    Mounting extension - 2-1/2"
    Mounting block - 1-3/4" high 3-7/8" wide

    Includes adjustable black mounting block.

    2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

    Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

    Great custom style and unsurpassed performance.

    Fits Harley-Davidson models
    Custom motorcycles and Choppers
    Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.


    Same headlight in chrome finish on one of the Demon's custom motorcycles.

     

    Learn More

18 Item(s)

per page

Grid  List 

Set Descending Direction