Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

Chrome 13" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

Chrome 13" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

SKU: 13 Chrome Frisco
ID #: 4662

Chrome 13" Rise Universal Ape Hangers "Frisco" Chubby 1-1/4" Diameter Handlebars for Harley Motorcycles

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Be the first to review this product

Availability: In stock

$109.99
Our Price  : $109.99
OR
 

Description

"CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
13" Rise 1-1/4" Handlebars


To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.

 

Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.

 

Triple plated chrome!
13" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.

 

Chrome finish









 




 









How to Install New Handlebar



Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.



  1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are


fabricated from 1 1/4-nch tubing and powder coated black.


2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.


3. The new handlebars have oblong holes to run the control wiring in and out through.


4.  air nozzle is used to blow the lead  string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.


5. The rope was used to pull the controls wire harnesses through the bars.


6. The factory risers wer used to mount the new bars.


7. Because the bars are T inch in diameter at  their center mounting position, a stock
clamp was used


8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.


9. The switch wiring exits the front of the switch housing and into the bars.


10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars


11. These stunning bars sure remind us of devil wings.


If you have any questions or need help with finding a product or having problems with checking out or site in general, please contact us 954-943-0000 or Email us at sales@demonscycle.com We will help you!

Details

"CHUBBY FRISCO" CHROME UNIVERSAL APEHANGERS
13" Rise 1-1/4" Handlebars


To fit Harley-Davidson FLST, FXST, Sportster XL (1200, Iron 883,Super Low, Seventy Two, Forty Eight, Street Bob, Fat Bob, Switchback)  including Throttle-by-wire models, and any custom application.
 
Chopper freaks in the 1960's cooked up some pretty wild handlebars for their custom death traps, especially in California's fabled San Francisco Bay Area. Chubby Frisco bar pays homage to the bikes of guys like Sonny Barger, Arlen Ness and Tobie Gene Levingston.
 
Triple plated chrome!
13" rise. 6" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.
 
Chrome finish

 

 

How to Install New Handlebar

Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.

  1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

fabricated from 1 1/4"-inch tubing and powder coated black.

2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

3. The new handlebars have oblong holes to run the control wiring in and out through.

4.  air nozzle is used to blow the lead  string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.

5. The rope was used to pull the controls wire harnesses through the bars.

6. The factory risers wer used to mount the new bars.

7. Because the bars are T inch in diameter at  their center mounting position, a stock
clamp was used

8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

9. The switch wiring exits the front of the switch housing and into the bars.

10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

11. These stunning bars sure remind us of devil wings.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.