Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models

Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models

SKU: 4" ZBAR Black
ID #: 4480

Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Be the first to review this product

Availability: In stock

$89.99
Our Price  : $89.99
  • OR
     

    Description

    Cafe Racer Style Custom
    1-1/4" 'Z-Bars'
    Black Handlebars


    These contemporary designs feature 1-1/4" diameter 'fat' tubing that is one of
    the hottest and newest custom bars out. Get them now to customize your bike to that one of a kind look. They have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to Cafe Racer style Metric Bikes and Sportster Models
    from 1974 to present and Custom Application.


    34"-wide
    4"-rise
    3"-pullback
    3 1/2" From Center to Center For Risers.










     









    How to Install New Handlebar



    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.



    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are


    fabricated from 1-1/4" inch tubing and powder coated black.


    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.


    3. The new handlebars have oblong holes to run the control wiring in and out through.


    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.


    5. The rope was used to pull the controls wire harnesses through the bars.


    6. The factory risers were used to mount the new bars.


    7. Because the bars are 1" inch in diameter at  their center mounting position, a stock
    clamp was used


    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.


    9. The switch wiring exits the front of the switch housing and into the bars.


    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars


    11. These stunning bars sure remind us of devil wings.


    If you have any questions or need help with finding a product or having problems with checking out or site in general, please contact us 954-943-0000 or Email us at sales@demonscycle.com We will help you!

    Details

    Cafe Racer Style Custom
    1-1/4" 'Z-Bars'
    Black Handlebars

    These contemporary designs feature 1-1/4" diameter 'fat' tubing that is one of
    the hottest and newest custom bars out. Get them now to customize your bike to that one of a kind look. They have holes to accommodate the wiring on
    all models from 1982 to present.
    They fit the Original Equipment and after-market
    risers fitted to Cafe Racer style Metric Bikes and Sportster Models
    from 1974 to present and Custom Application.

    34"-wide
    4"-rise
    3"-pullback
    3 1/2" From Center to Center For Risers.

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4" inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are 1" inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.