8" Black Z-Bars 1-1/4" Drag Style Handlebars for Harley-Davidson Softail Sportster Dyna
Custom 8" 'Z-Bars'
These contemporary designs feature 1-1/4"-diameter 'fat' tubing that is one of
the hot, new custom 'looks' and have holes to accommodate the wiring on
all models from 1982 to present.
They fit the Original Equipment and after-market
risers fitted to most Harley-Davidson models
(except Springer Softail models)
from 1974 to present and Custom Application.
How to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
fabricated from 1-1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers were used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
You may also be interested in the following product(s)