Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson

16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson

SKU: Fat 16 Apes Controls
ID #: 1886

16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson
  • 16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson
  • 16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson
  • 16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson
  • 16" Ape Hangers 1-1/4" diameter handlebars with Hand Controls for Harley-Davidson

Be the first to review this product

Availability: In stock

$399.99
Our Price  : $399.99
  • OR
     

    Description

    Chrome 16" Rise Ape Hangers


    with Smooth-Contour Control Kit
    and Chrome Switches


    This listing is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.


    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.


    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.


    Here is what you are getting:


    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.


    9/16" Bore master cylinder. For Single disc application

    (Please contact us first if you are looking for a dual disc set-up)


    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99


    ----------------------------------------------------------------


    Chrome Apehangers
    16" Rise 1-1/4" Handlebars


    Show chromed!
    16" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99


    --------------------------------------------------------------


    Chrome Switches and Wire Harness


    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.

    Retail $206.99


    ---------------------------------------------------------------


    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97



    XXX Star Nicki Hunter



































    How to Install New Handlebar



    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.



    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are


    fabricated from 1-1/4" inch tubing and powder coated black.


    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.


    3. The new handlebars have oblong holes to run the control wiring in and out through.


    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.


    5. The rope was used to pull the controls wire harnesses through the bars.


    6. The factory risers were used to mount the new bars.


    7. Because the bars are 1" inch in diameter at  their center mounting position, a stock
    clamp was used


    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.


    9. The switch wiring exits the front of the switch housing and into the bars.


    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars


    11. These stunning bars sure remind us of devil wings.


    If you have any questions or need help with finding a product or having problems with checking out or site in general, please contact us 954-943-0000 or Email us at sales@demonscycle.com We will help you!

    Details

    Chrome 16" Rise Ape Hangers

    with Smooth-Contour Control Kit
    and Chrome Switches

    This listing is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.

    All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
    Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.

    This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.
    9/16" Bore master cylinder. For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------

    Chrome Apehangers
    16" Rise 1-1/4" Handlebars


    Show chromed!
    16" rise. 8.5" backward sweep. 1-1/4" diameter. Center section tapers to 1" so that standard handlebar controls fit.
    36" wide from tip to tip. Bars are dimpled for late control wiring.
    Come with drilled wiring hols.

    Retail $210.99

    --------------------------------------------------------------

    Chrome Switches and Wire Harness

    High quality USA made chrome switches for hand controls.
    Wires are soldered and color-coded for easy installation.

    Retail $206.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    206.99
    Professional Installation 235.00
    _________________
    Total: $1055.97


    XXX Star Nicki Hunter

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1-1/4" inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1-1/4" inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers were used to mount the new bars.

    7. Because the bars are 1" inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch housing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.