Welcome to Demon's Cycle Inc.

Your Shopping cart is empty.

Skip to Main Content »

15" Rise Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Motorcycles

15" Rise Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Motorcycles

SKU: 15 Chrome El Diablo JUST Controls 11-323CP
ID #: 5108

15" Rise Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Motorcycles

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Be the first to review this product

Availability: In stock

$275.00
Our Price  : $275.00
  • OR
     

    Description

    Chrome 15" Rise 'El Diablo' Ape Hangers
    with Smooth-Contour Control Kit


    This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.


    All components are brand new.


    Here is what you are getting:


    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.

    Will fit all single disc 1996-2010 Harley-Davidson models.
    Will also fit 1984 thru 1995 single disc models with simple rewiring.


    It is possible to update most models from 1972 thru 1995 to the latest style with minor wiring and control cable changes.
    Will fit 2007-Up models with safety switch.
    9/16" Bore master cylinder.




    For Single disc application

    (Please contact us first if you are looking for a dual disc set-up)

    Hydraulic Hand controls also Available


    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99


    ----------------------------------------------------------------



    Chrome 'El Diablo'
    Apehangers
    15" Rise 1-1/4" Handlebars


    Show chromed!
    15" rise. 8" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.

    Retail $210.99

    ---------------------------------------------------------------


    Total package price: 402.99
    210.99
    _________________
    Total: $613.98


     



















     









    How to Install New Handlebar



    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.



    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are


    fabricated from 1 1/4-nch tubing and powder coated black.


    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.


    3. The new handlebars have oblong holes to run the control wiring in and out through.


    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.


    5. The rope was used to pull the controls wire harnesses through the bars.


    6. The factory risers wer used to mount the new bars.


    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used


    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.


    9. The switch wiring exits the front of the switch housing and into the bars.


    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars


    11. These stunning bars sure remind us of devil wings.


    If you have any questions or need help with finding a product or having problems with checking out or site in general, please contact us 954-943-0000 or Email us at sales@demonscycle.com We will help you!

    Details

    Chrome 15" Rise 'El Diablo' Ape Hangers
    with Smooth-Contour Control Kit

    This listing is for 1-1/4" fat handlebar set-up with smooth contour chrome hand controls. All components are triple-plated chrome top quality parts.

    All components are brand new.

    Here is what you are getting:

    Smooth-Contour Hand Controls
    Unique design has hidden underside mounting
    on the switch housings for
    an unobstructed smooth, rounded surface on the top housing.
    BETTER LOOK AND CHROME THAN ANY HD PRODUCT.

    Will fit all single disc 1996-2010 Harley-Davidson models.
    Will also fit 1984 thru 1995 single disc models with simple rewiring.

    It is possible to update most models from 1972 thru 1995 to the latest style with minor wiring and control cable changes.
    Will fit 2007-Up models with safety switch.
    9/16" Bore master cylinder.

    For Single disc application
    (Please contact us first if you are looking for a dual disc set-up)
    Hydraulic Hand controls also Available

    This is top quality kit.
    Much higher quality than HD or any aftermarket product. Simply the best.
    Made in U.S.A.


    Retail $402.99

    ----------------------------------------------------------------


    Chrome 'El Diablo'
    Apehangers
    15" Rise 1-1/4" Handlebars


    Show chromed!
    15" rise. 8" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
    34-1/2" wide from tip to tip.
    Come with drilled wiring holes.

    Retail $210.99

    ---------------------------------------------------------------

    Total package price: 402.99
    210.99
    _________________
    Total: $613.98

     

     

    How to Install New Handlebar

    Ever notice how most fine artists depict the devil? They draw this demon
    from hells wings as having sharp angles. This vision was not lost on
    Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
    devil wings. No matter the imagery, we thought they have a real cool look, as
    did Navy Seaman Mario Guerrero.

    1. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are

    fabricated from 1 1/4"-inch tubing and powder coated black.

    2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.

    3. The new handlebars have oblong holes to run the control wiring in and out through.

    4.  air nozzle is used to blow the lead  string through the bars,Then a length of
    rope is attached to the string and pulled through
    the bars.

    5. The rope was used to pull the controls wire harnesses through the bars.

    6. The factory risers wer used to mount the new bars.

    7. Because the bars are T inch in diameter at  their center mounting position, a stock
    clamp was used

    8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.

    9. The switch wiring exits the front of the switch housing and into the bars.

    10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars

    11. These stunning bars sure remind us of devil wings.

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.